| Author | Topic |
|---|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
Re: Making a Body Kit Mould
|
Sun, 03 April 2005 10:24
 
|
 |
like STR8 2.8 said, it is rather costly to make a proper mold of a product. unless you can sell them, but then copyright comes into play.
one way i have made copies of things i have made before in the past is to put wax release to the item to be copied and lay a couple layers of fibreglass over it, then pull it off once it has set and clean it. then build the rear of what i just made with more fibreglass to the desired strength.
the front can then have a light layer of bog on it and sanded smoothe ready to paint.
bare in mind the part you just made will be slightly bigger than the original item doing it this way, but much cheaper than making a mold and then another item.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Making a Body Kit Mould
|
ABTO | Sun, 03 April 2005 03:37 |
|
Re: Making a Body Kit Mould
|
STR8 2.8 | Sun, 03 April 2005 04:16 |
|
Re: Making a Body Kit Mould
|
ABTO | Sun, 03 April 2005 04:29 |
|
Re: Making a Body Kit Mould
|
STR8 2.8 | Sun, 03 April 2005 09:24 |
|
Re: Making a Body Kit Mould
|
ABTO | Sun, 03 April 2005 10:03 |
|
Re: Making a Body Kit Mould
|
STR8 2.8 | Sun, 03 April 2005 10:22 |
|
Re: Making a Body Kit Mould
|
feral4mr2 | Sun, 03 April 2005 10:24 |
|
Re: Making a Body Kit Mould
|
ABTO | Sun, 03 April 2005 10:42 |
|
Re: Making a Body Kit Mould
|
MFX_Neko_86 | Sun, 03 April 2005 14:57 |
|
Re: Making a Body Kit Mould
|
takai | Sun, 03 April 2005 15:01 |
|
Re: Making a Body Kit Mould
|
EldarO | Sun, 03 April 2005 15:21 |
|
Re: Making a Body Kit Mould
|
MFX_Neko_86 | Sun, 03 April 2005 15:32 |
|
Re: Making a Body Kit Mould
|
Dirty_Sanchez | Sun, 03 April 2005 23:49 |
|
Re: Making a Body Kit Mould
|
STR8 2.8 | Mon, 04 April 2005 00:13 |
|
Re: Making a Body Kit Mould
|
81LOWLUX | Mon, 04 April 2005 00:38 |
|
Re: Making a Body Kit Mould
|
ABTO | Mon, 04 April 2005 11:10 |
|
Re: Making a Body Kit Mould
|
STR8 2.8 | Mon, 04 April 2005 11:39 |
|
Re: Making a Body Kit Mould
|
feral4mr2 | Mon, 04 April 2005 12:04 |
|
Re: Making a Body Kit Mould
|
barge | Mon, 04 April 2005 09:13 |
|
Re: Making a Body Kit Mould
|
ABTO | Mon, 04 April 2005 12:02 |
|
Re: Making a Body Kit Mould
|
ABTO | Mon, 04 April 2005 12:03 |
|
Re: Making a Body Kit Mould
|
sxr01r | Mon, 04 April 2005 15:38 |
|
Re: Making a Body Kit Mould
|
Lambolica | Mon, 04 April 2005 22:04 |
|
Re: Making a Body Kit Mould
|
81LOWLUX | Mon, 04 April 2005 22:26 |
|
Re: Making a Body Kit Mould
|
MFX_Neko_86 | Tue, 05 April 2005 14:29 |
|
Re: Making a Body Kit Mould
|
MFX_Neko_86 | Wed, 06 April 2005 12:26 |
|
Re: Making a Body Kit Mould
|
STR8 2.8 | Wed, 06 April 2005 12:57 |
|
Re: Making a Body Kit Mould
|
takai | Wed, 06 April 2005 13:03 |
|
Re: Making a Body Kit Mould
|
MFX_Neko_86 | Thu, 07 April 2005 15:02 |
