Toymods Car Club Inc: Tech & Conversions => DIY w2a intercooler core design

Toymods Car Club
www.toymods.org.au

F.A.Q.

Toymods » Tech & Conversions » DIY w2a intercooler core design Show: Today's Posts :: Show Polls Email to friend

Author

Topic

Joshstix
Forums Junkie

Toymods Vice President

Location:
Sydney
Registered:
May 2002

Re: DIY w2a intercooler core design	Mon, 04 April 2005 06:21

I agree with Shiny, on the proviso that you are using a core designed to be used in this way. If the air is only in contact with the cooler for 60mm of travel then there is no way the air will be cooled enough. The ST205 cooler is designed to work this way but it has a core that is about 10cm30cm20cm (completely random guess on dimensions because I'm not near my cooler). This means the air is in contact with the cooling element for far longer, at least 200mm of travel. The fact is though we don't have access to intercoolers shaped like this except if they are already W/A. [Updated on: Mon, 04 April 2005 06:27] [Report message to a moderator]

Send a private message to this user

[Message index]

Subject Poster Date

Read Message DIY w2a intercooler core design feral4mr2 Sun, 03 April 2005 10:38
Re: DIY w2a intercooler core design Joshstix Sun, 03 April 2005 10:55
Re: DIY w2a intercooler core design toof Sun, 03 April 2005 11:30
Re: DIY w2a intercooler core design feral4mr2 Sun, 03 April 2005 12:08
Read Message Re: DIY w2a intercooler core design shinybluesteel Sun, 03 April 2005 22:26
Re: DIY w2a intercooler core design Joshstix Mon, 04 April 2005 04:49
Re: DIY w2a intercooler core design shinybluesteel Mon, 04 April 2005 06:03
Re: DIY w2a intercooler core design toof Mon, 04 April 2005 06:07
Read Message Re: DIY w2a intercooler core design Joshstix Mon, 04 April 2005 06:21
Re: DIY w2a intercooler core design feral4mr2 Mon, 04 April 2005 11:54
Re: DIY w2a intercooler core design toof Mon, 04 April 2005 11:59
Re: DIY w2a intercooler core design thechuckster Mon, 04 April 2005 12:06
Read Message Re: DIY w2a intercooler core design feral4mr2 Mon, 04 April 2005 13:29
Re: DIY w2a intercooler core design thechuckster Mon, 04 April 2005 16:49
Re: DIY w2a intercooler core design feral4mr2 Mon, 04 April 2005 20:55
Re: DIY w2a intercooler core design thechuckster Mon, 04 April 2005 22:33
Read Message Re: DIY w2a intercooler core design Miss MR2 Mon, 04 April 2005 12:42
Re: DIY w2a intercooler core design feral4mr2 Mon, 04 April 2005 13:15
Re: DIY w2a intercooler core design 10sec_rx7 Tue, 05 April 2005 04:30
Re: DIY w2a intercooler core design feral4mr2 Tue, 05 April 2005 10:47
Read Message Re: DIY w2a intercooler core design thechuckster Tue, 05 April 2005 13:29
Re: DIY w2a intercooler core design feral4mr2 Tue, 05 April 2005 21:28
Re: DIY w2a intercooler core design 10sec_rx7 Tue, 05 April 2005 12:02
Re: DIY w2a intercooler core design 10sec_rx7 Sat, 09 April 2005 23:23
Read Message Re: DIY w2a intercooler core design feral4mr2 Sun, 10 April 2005 06:30

Previous Topic: Electonic ignition for 18RG
Next Topic: small pipe thing in between 18r bore

-=] Back to Top [=-

Current Time: Wed Jul 23 10:20:32 UTC 2025

Total time taken to generate the page: 0.0049231052398682 seconds

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.