Author | Topic |

Location: Canberra
Registered: April 2003
|
Re: Adjusting Pop Ups
|
Tue, 05 April 2005 11:30

|
 |
no the motor in toyotas light only goes in one position, it doesn't have any adjustment, the only adjustments are that arm and the 2 screws on the light casing.
If it has been involved in an accident the wall it is mounted to could be bent a bit making it not sit flush, this was one of the problems I had after fixing the front of my MR2, to couter this after bashing the wall out the best I could put a few washers or spacers behind a couple of the lower bolts on the light assembly and used longer bolts, this corrects the light frame and brings the front up to sit level
|
|
|