Location: Melbourne, Australia
Registered: March 2005
Re: MA61 wheel + LN106 caliper = ?
Tue, 05 April 2005 15:05
Thanks for the feedback guys...
Just dummied it up, the innermost of three ridges on the face of the caliper when mounted slightly fouls on the inside of the MA61 wheel spokes. It's real close. I'm going to die grind this ridge down a bit (or maybe flush with the caliper face) and expect all to be fine.
If you really wanted a small spacer on the hub would lift the wheel clear. Only need a few millimetres.
The outside of the caliper seems to adequately clears the inner wheel circumference.
Tue, 05 April 2005 15:05
