| Author | Topic |
|---|
Location:
Sydney
Registered:
May 2002
|
 Turbo 20V
|
Sun, 08 December 2002 14:23
 
|
 |
 Hi Guys,
Thanks Nark for posting the message for me.
I am only looking to do low boost, wat eva the factory setting is...most likely around the 8psi.
I know its going to cost, but I am after a simple low budget solution, one factor is money the second is time...
I was going the sell the thing, but thanks to Nark's encouragement I got a turbo to bring life back to the little beast.
My question is wat is the low budget approach and less amount of time I need to get the blow dryer into the engine bay.
1. If decompressing the head is not the answer, wat is?
2. Do I really need a ECU as the fueling should still have some head room left, considering I am running low boost.
3. Will my current Dizzy work with some minor retardation or do I need an aftermarket unit or can I fit in the 4AGZE unit and remove my VVT-i sensor.
4. Will my VVT-i sensor need to be switched on constantly or altered.
5. Can I use my current plenum with some additional gasket and good old hi temp silicon.
I have seen some cars at the motor show last year with turbo running low boost and did with out intercoolers and just used rubber to pipe the charge air, I am hoping to be able to do the same.
The plumbing for the oil/water I have some ideas already, but any other suggestions will be welcomed.
Regards,
Pete20v
peter20v@yahoo.com.au
|
|
|
| | Subject | Poster | Date |
|---|
 |
How-To: Turbo 20V
|
Nark | Fri, 06 December 2002 06:33 |
|
Re: How-To: Turbo 20V
|
TE72_Turbo | Sat, 07 December 2002 12:20 |
|
Re: How-To: Turbo 20V
|
Norbie | Sun, 08 December 2002 00:36 |
|
Re: How-To: Turbo 20V
|
Nark | Sun, 08 December 2002 00:55 |
|
Re: How-To: Turbo 20V
|
justcallmefrank | Sun, 08 December 2002 00:57 |
|
Re: How-To: Turbo 20V
|
Youngy | Sun, 08 December 2002 01:09 |
|
Re: How-To: Turbo 20V
|
SPEEDCORE | Sun, 08 December 2002 03:04 |
|
Re: How-To: Turbo 20V
|
Nark | Sun, 08 December 2002 09:23 |
|
Re: How-To: Turbo 20V
|
justcallmefrank | Sun, 08 December 2002 12:39 |
|
Turbo 20V
|
SilyKa | Sun, 08 December 2002 14:23 |
|
Re: Turbo 20V
|
MR. 2 | Tue, 10 December 2002 03:41 |
|
Re: How-To: Turbo 20V
|
Norbie | Tue, 10 December 2002 04:08 |
|
Re: How-To: Turbo 20V
|
Johnny | Tue, 10 December 2002 06:08 |
|
Re: How-To: Turbo 20V
|
YelloRolla | Sat, 14 December 2002 03:37 |
|
Re: How-To: Turbo 20V
|
Alainve | Sun, 15 December 2002 07:17 |
|
Re: How-To: Turbo 20V
|
SilyKa | Mon, 16 December 2002 10:12 |
