| Author | Topic |
|---|
Location:
Melbourne
Registered:
May 2002
|
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
Sat, 09 April 2005 02:16
 
|
 |
| ZZT231 wrote on Sat, 09 April 2005 09:18 |
| sideshow wrote on Sat, 09 April 2005 09:04 |
those switches suk they always leak if u fit them in hose
|
I am running a Davis Craig Thermo sender thingy in my MA61, I got mine for AUD$65.
I have driven 2,000kms on it and mine is not leaking. A forum member installed it as I wasn't familiar with the setup. The sender is setup where if the temp sits in the middle for too long the thermos come on when the temp still reads middle, thermostat opens and the temp drops to below the bar...
Cheers.
|
Im the sucker that installed this one, sometimes thay are the easyest soloution ($35 from repco) take care with the copper tube, use plenty of good silastic and let it cure for about 30min then start the car with the cap off to allow the heat to fully cure it - this typicly stops any leaks, but a propper thermo switch is allways a prefered option if your ecu does not have a output for a fan.
other cheapo options are thermal circit breakers from jaycar at about $5 each but this requires creative mounting.
P.S sideshow carefull installing it in the fins if a tube(s) is partly blocked or becomes so you can get cold spots i highly recomend it being in the water.
[Updated on: Sat, 09 April 2005 02:21]
|
|
|
| | Subject | Poster | Date |
|---|
 |
THERMOFAN CONVERSIONS BEWARE!!
|
V8_MA61 | Fri, 08 April 2005 11:25 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
gianttomato | Fri, 08 April 2005 14:25 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
September_Squall | Fri, 08 April 2005 14:56 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
gianttomato | Fri, 08 April 2005 15:47 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
September_Squall | Fri, 08 April 2005 15:56 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
IRA11Y | Fri, 08 April 2005 21:13 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
manmx83 | Fri, 08 April 2005 14:53 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
manmx83 | Fri, 08 April 2005 15:26 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
sideshow | Fri, 08 April 2005 22:34 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
81LOWLUX | Fri, 08 April 2005 23:01 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
sideshow | Fri, 08 April 2005 23:04 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
ZZT231 | Fri, 08 April 2005 23:18 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
gianttomato | Sat, 09 April 2005 00:07 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
madmont | Sat, 09 April 2005 00:45 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
Allan | Sat, 09 April 2005 02:16 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
Allan | Sat, 09 April 2005 00:41 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
Chris Davey | Sat, 09 April 2005 01:37 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
gianttomato | Sat, 09 April 2005 03:55 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
sideshow | Sat, 09 April 2005 02:03 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
Fattony | Sat, 09 April 2005 02:21 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
V8_MA61 | Sat, 09 April 2005 09:05 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
thechuckster | Sat, 09 April 2005 09:13 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
V8_MA61 | Sat, 09 April 2005 09:16 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
ed_ma61 | Sun, 10 April 2005 13:12 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
takai | Sat, 09 April 2005 10:50 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
people100 | Sun, 10 April 2005 05:55 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
TheStitt | Sun, 10 April 2005 23:09 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
81LOWLUX | Sun, 10 April 2005 23:21 |
|
Re: THERMOFAN CONVERSIONS BEWARE!!
|
madmont | Mon, 11 April 2005 05:00 |
| Current Time:
Wed Mar 12 20:22:41 UTC 2025 |
Total time taken to generate the page: 0.011602163314819 seconds |
