| Author | Topic |
|---|
On Probation
Location:
North East NSW
Registered:
December 2002
|
|
Re: ke20 conversion to later model stud pattern
|
Wed, 13 April 2005 12:55
 
|
 |
i have ke55 brakes on my ke25 struts, the ke70 uses the same rotors and calipers
some ke70s have a wierd backing plate, some have one that will fit on a ke20. ke55 backing plates all fit on ke20. you'll need to drill and tap the ke25 struts to the same bolts as the ke55 struts (M10 coarse thread)
you can use the ke55/70 hubs, just with the ke25 inner bearing. there's about 1mm difference in the seals but it doesn't really matter
the difference is nice, but if you're making a bit of power you'll want better brakes. you can't just swap in other struts, you'll need to do steering knuckles and ball joints too
|
|
|
