| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: How to modify petrol tank?
|
Thu, 14 April 2005 12:41
 
|
 |
| WHITCHY wrote on Thu, 14 April 2005 22:28 |
How do I make sure there is no fuel/fumes left in the tank so it wont blow up when cutting/welding
|
wash the tank with warm sopay water.. then to be sure, fill the tank with water (a little below the level of the welding) to reduce the airspace.... no air = no explosion
| WHITCHY wrote on Thu, 14 April 2005 22:28 |
How do I know where to mount the fuel pump/baffle
Is it really that simple, just cutting and welding, running lines and electricals?
|
you may not need baffle... or can fit a small can baffle around the pump itself.
i used the ring off an AE86 tank, welded it to a KE20 tank, and then made my own pump hanger bracket.
easiest way is to get a hanger assembly from an EFI car, change the bracket length, and install in your tank....
CYa, Stewart
|
|
|
