| Author | Topic |
|---|
Location:
Melbourne, Australia
Registered:
March 2005
|
|
Re: Using different knucklearms for diff camber
|
Fri, 15 April 2005 13:47
 
|
 |
| Super Jamie wrote on Fri, 15 April 2005 16:56 |
actually sorry that's the wrong calculation  it should be tan^inv(5/400) which is 0.008 degrees. even less!
that's what you get for sleeping through high school
|
The basic suggestion is you'll get stuff all. If you need more negative camber you could look at a strut bend or longer lower control arms.
I think RA40 arms are a bit longer than TA22 arms, maybe 10mm? Punch 10mm into your high school trig formulas as described by Super Jamie and you'll get an idea of what is achievable.
However the actual change in camber may be different than calculated given the inherent angle in the strut/hub assembly?
Maybe go back to basics. What are you trying to achieve (first principles)? A reduction in understeer? An improvement in turn-in? (similar but not identical principles)
|
|
|
| | Subject | Poster | Date |
|---|
 |
Using different knucklearms for diff camber
|
ta2272 | Thu, 14 April 2005 04:16 |
|
Re: Using different knucklearms for diff camber
|
wilbo666 | Thu, 14 April 2005 04:30 |
|
Re: Using different knucklearms for diff camber
|
TurboRA28 | Thu, 14 April 2005 05:08 |
|
Re: Using different knucklearms for diff camber
|
wilbo666 | Thu, 14 April 2005 05:11 |
|
Re: Using different knucklearms for diff camber
|
Henn | Thu, 14 April 2005 05:58 |
|
Re: Using different knucklearms for diff camber
|
ta2272 | Thu, 14 April 2005 06:05 |
|
Re: Using different knucklearms for diff camber
|
wilbo666 | Thu, 14 April 2005 07:14 |
|
Re: Using different knucklearms for diff camber
|
TurboRA28 | Thu, 14 April 2005 07:16 |
|
Re: Using different knucklearms for diff camber
|
jesseT18 | Thu, 14 April 2005 09:12 |
|
Re: Using different knucklearms for diff camber
|
ta2272 | Thu, 14 April 2005 15:08 |
|
Re: Using different knucklearms for diff camber
|
September_Squall | Thu, 14 April 2005 15:13 |
|
Re: Using different knucklearms for diff camber
|
ta2272 | Fri, 15 April 2005 00:26 |
|
Re: Using different knucklearms for diff camber
|
wilbo666 | Fri, 15 April 2005 00:37 |
|
Re: Using different knucklearms for diff camber
|
Super Jamie | Fri, 15 April 2005 06:50 |
|
Re: Using different knucklearms for diff camber
|
Super Jamie | Fri, 15 April 2005 06:56 |
|
Re: Using different knucklearms for diff camber
|
ta2272 | Fri, 15 April 2005 09:01 |
|
Re: Using different knucklearms for diff camber
|
September_Squall | Fri, 15 April 2005 13:47 |
|
Re: Using different knucklearms for diff camber
|
Super Jamie | Fri, 15 April 2005 12:51 |
|
Re: Using different knucklearms for diff camber
|
ta2272 | Fri, 15 April 2005 13:47 |
|
Re: Using different knucklearms for diff camber
|
takai | Fri, 15 April 2005 14:05 |
|
Re: Using different knucklearms for diff camber
|
September_Squall | Fri, 15 April 2005 14:47 |
|
Re: Using different knucklearms for diff camber
|
4ageeza | Fri, 15 April 2005 16:27 |
|
Re: Using different knucklearms for diff camber
|
ta2272 | Sat, 16 April 2005 00:01 |
|
Re: Using different knucklearms for diff camber
|
Super Jamie | Sat, 16 April 2005 00:44 |
|
Re: Using different knucklearms for diff camber
|
Super Jamie | Sat, 16 April 2005 01:08 |
|
Re: Using different knucklearms for diff camber
|
takai | Sat, 16 April 2005 01:54 |
|
Re: Using different knucklearms for diff camber
|
ta2272 | Sat, 16 April 2005 02:35 |
|
Re: Using different knucklearms for diff camber
|
Super Jamie | Sat, 16 April 2005 02:46 |
|
Re: Using different knucklearms for diff camber
|
September_Squall | Sat, 16 April 2005 04:57 |
|
Re: Using different knucklearms for diff camber
|
September_Squall | Sat, 16 April 2005 05:03 |
|
Re: Using different knucklearms for diff camber
|
ta2272 | Sat, 16 April 2005 05:50 |
|
Re: Using different knucklearms for diff camber
|
Super Jamie | Sat, 16 April 2005 06:57 |
|
Re: Using different knucklearms for diff camber
|
ta2272 | Sat, 16 April 2005 09:54 |
|
Re: Using different knucklearms for diff camber
|
September_Squall | Sat, 16 April 2005 13:08 |
|
Re: Using different knucklearms for diff camber
|
Super Jamie | Sun, 17 April 2005 00:01 |
|
Re: Using different knucklearms for diff camber
|
wilbo666 | Sun, 17 April 2005 02:04 |
|
Re: Using different knucklearms for diff camber
|
ta2272 | Sun, 17 April 2005 03:16 |
|
Re: Using different knucklearms for diff camber
|
styler | Sun, 17 April 2005 03:17 |
|
Re: Using different knucklearms for diff camber
|
oldcorollas | Mon, 18 April 2005 13:00 |
|
Re: Using different knucklearms for diff camber
|
indigoid | Tue, 19 April 2005 10:53 |
|
Re: Using different knucklearms for diff camber
|
Super Jamie | Tue, 19 April 2005 22:29 |
