F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Using different knucklearms for diff camber Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Super Jamie Regular On Probation Location: North East NSW Registered: December 2002	Re: Using different knucklearms for diff camber Sat, 16 April 2005 00:44 so basically you have the front setup too stiff and it understeers. is that an aftermarket swaybar? change it back to stock. definately adjust your dampers down. a suspension place can take your springs out and measure the spring rate on them. i would think maybe something around 175-225lb would be decent for a ta22? not sure there are plenty of wreckers in qld who let you go into the yard. kelly wrecking in zilmere, abc wreckers and wacol wreckers out near ipswich. there are others i don't know about as well. if you're in brisbane/goldcoast anyway you can make your own adjustable strut tops out of steel plate and bolts from bolt barn, and bearings from the bearing shop like i did. metal places will cut any design out for you. you'll need access to a drill press and a thread tap and alot of patience. then just take what needs to be welded into somewhere and pay them to tack a few bolts in for the bolts which hold the thing to the body. all up mine cost me just over $100, but pointless with stock springs as there's bugger all adjustment area if i were you, i'd turn down the dampers, use a stock front sway bar, and see how you go. control arms sound like too much hassle and extra track makes your car look silly. unless you're racing competitively on many varying types of racetracks, adjustable tops aren't required. get your struts bent for more camber if you still want it. 1 or 1.5 degrees is plenty for street use [Report message to a moderator]

	Subject	Poster	Date
	Using different knucklearms for diff camber	ta2272	Thu, 14 April 2005 04:16
	Re: Using different knucklearms for diff camber	wilbo666	Thu, 14 April 2005 04:30
	Re: Using different knucklearms for diff camber	TurboRA28	Thu, 14 April 2005 05:08
	Re: Using different knucklearms for diff camber	wilbo666	Thu, 14 April 2005 05:11
	Re: Using different knucklearms for diff camber	Henn	Thu, 14 April 2005 05:58
	Re: Using different knucklearms for diff camber	ta2272	Thu, 14 April 2005 06:05
	Re: Using different knucklearms for diff camber	wilbo666	Thu, 14 April 2005 07:14
	Re: Using different knucklearms for diff camber	TurboRA28	Thu, 14 April 2005 07:16
	Re: Using different knucklearms for diff camber	jesseT18	Thu, 14 April 2005 09:12
	Re: Using different knucklearms for diff camber	ta2272	Thu, 14 April 2005 15:08
	Re: Using different knucklearms for diff camber	September_Squall	Thu, 14 April 2005 15:13
	Re: Using different knucklearms for diff camber	ta2272	Fri, 15 April 2005 00:26
	Re: Using different knucklearms for diff camber	wilbo666	Fri, 15 April 2005 00:37
	Re: Using different knucklearms for diff camber	Super Jamie	Fri, 15 April 2005 06:50
	Re: Using different knucklearms for diff camber	Super Jamie	Fri, 15 April 2005 06:56
	Re: Using different knucklearms for diff camber	ta2272	Fri, 15 April 2005 09:01
	Re: Using different knucklearms for diff camber	September_Squall	Fri, 15 April 2005 13:47
	Re: Using different knucklearms for diff camber	Super Jamie	Fri, 15 April 2005 12:51
	Re: Using different knucklearms for diff camber	ta2272	Fri, 15 April 2005 13:47
	Re: Using different knucklearms for diff camber	takai	Fri, 15 April 2005 14:05
	Re: Using different knucklearms for diff camber	September_Squall	Fri, 15 April 2005 14:47
	Re: Using different knucklearms for diff camber	4ageeza	Fri, 15 April 2005 16:27
	Re: Using different knucklearms for diff camber	ta2272	Sat, 16 April 2005 00:01
	Re: Using different knucklearms for diff camber	Super Jamie	Sat, 16 April 2005 00:44
	Re: Using different knucklearms for diff camber	Super Jamie	Sat, 16 April 2005 01:08
	Re: Using different knucklearms for diff camber	takai	Sat, 16 April 2005 01:54
	Re: Using different knucklearms for diff camber	ta2272	Sat, 16 April 2005 02:35
	Re: Using different knucklearms for diff camber	Super Jamie	Sat, 16 April 2005 02:46
	Re: Using different knucklearms for diff camber	September_Squall	Sat, 16 April 2005 04:57
	Re: Using different knucklearms for diff camber	September_Squall	Sat, 16 April 2005 05:03
	Re: Using different knucklearms for diff camber	ta2272	Sat, 16 April 2005 05:50
	Re: Using different knucklearms for diff camber	Super Jamie	Sat, 16 April 2005 06:57
	Re: Using different knucklearms for diff camber	ta2272	Sat, 16 April 2005 09:54
	Re: Using different knucklearms for diff camber	September_Squall	Sat, 16 April 2005 13:08
	Re: Using different knucklearms for diff camber	Super Jamie	Sun, 17 April 2005 00:01
	Re: Using different knucklearms for diff camber	wilbo666	Sun, 17 April 2005 02:04
	Re: Using different knucklearms for diff camber	ta2272	Sun, 17 April 2005 03:16
	Re: Using different knucklearms for diff camber	styler	Sun, 17 April 2005 03:17
	Re: Using different knucklearms for diff camber	oldcorollas	Mon, 18 April 2005 13:00
	Re: Using different knucklearms for diff camber	indigoid	Tue, 19 April 2005 10:53
	Re: Using different knucklearms for diff camber	Super Jamie	Tue, 19 April 2005 22:29

Previous Topic:	14" tyres - opinions please
Next Topic:	MA61 Diff Swap?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.