F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Using different knucklearms for diff camber Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Super Jamie Regular On Probation Location: North East NSW Registered: December 2002	Re: Using different knucklearms for diff camber Sat, 16 April 2005 01:08 also, whats the rest of your wheel alignment set to? castor changes the camber of the struts as you turn more. you can usually wind a heap of castor into an old toyota, i'm running about 2.75 degrees at the moment. some people think anything over 2.5 is a waste toe changes greatly how the car turns. toe in will make initial turn in harder, but the car will be alot more stable through the corner, and at high speed, and over crappy road surfaces. toe out makes your car turn in quicker (and alot easier), but it will also respond more to road graduations (this is called bump steer), and will tend to move about a bit more at speed (say >80km/h) on the street you usually run no toe, or slight toe in. on a racecar you may run toe out depending on situation. currently i have 1mm toe in, and it's nice. i used to have about 4mm toe out on my corolla, which i liked for cornering, but also didn't like beacuse i'm driving the car on god awful regional nsw roads made by council workers who can't do their job properly - hit a really bad patch at 160km/h and i'd be fighting to keep the car in a straight line it's easy to wreck the handling of a car by just bolting on parts nilly willy, you also need to look at what you're doing with it. if you're just driving on the street, lower it so it looks good but isn't causing problems, stiffen up the springs a little, get good shocks and don't touch anything else [Report message to a moderator]

	Subject	Poster	Date
	Using different knucklearms for diff camber	ta2272	Thu, 14 April 2005 04:16
	Re: Using different knucklearms for diff camber	wilbo666	Thu, 14 April 2005 04:30
	Re: Using different knucklearms for diff camber	TurboRA28	Thu, 14 April 2005 05:08
	Re: Using different knucklearms for diff camber	wilbo666	Thu, 14 April 2005 05:11
	Re: Using different knucklearms for diff camber	Henn	Thu, 14 April 2005 05:58
	Re: Using different knucklearms for diff camber	ta2272	Thu, 14 April 2005 06:05
	Re: Using different knucklearms for diff camber	wilbo666	Thu, 14 April 2005 07:14
	Re: Using different knucklearms for diff camber	TurboRA28	Thu, 14 April 2005 07:16
	Re: Using different knucklearms for diff camber	jesseT18	Thu, 14 April 2005 09:12
	Re: Using different knucklearms for diff camber	ta2272	Thu, 14 April 2005 15:08
	Re: Using different knucklearms for diff camber	September_Squall	Thu, 14 April 2005 15:13
	Re: Using different knucklearms for diff camber	ta2272	Fri, 15 April 2005 00:26
	Re: Using different knucklearms for diff camber	wilbo666	Fri, 15 April 2005 00:37
	Re: Using different knucklearms for diff camber	Super Jamie	Fri, 15 April 2005 06:50
	Re: Using different knucklearms for diff camber	Super Jamie	Fri, 15 April 2005 06:56
	Re: Using different knucklearms for diff camber	ta2272	Fri, 15 April 2005 09:01
	Re: Using different knucklearms for diff camber	September_Squall	Fri, 15 April 2005 13:47
	Re: Using different knucklearms for diff camber	Super Jamie	Fri, 15 April 2005 12:51
	Re: Using different knucklearms for diff camber	ta2272	Fri, 15 April 2005 13:47
	Re: Using different knucklearms for diff camber	takai	Fri, 15 April 2005 14:05
	Re: Using different knucklearms for diff camber	September_Squall	Fri, 15 April 2005 14:47
	Re: Using different knucklearms for diff camber	4ageeza	Fri, 15 April 2005 16:27
	Re: Using different knucklearms for diff camber	ta2272	Sat, 16 April 2005 00:01
	Re: Using different knucklearms for diff camber	Super Jamie	Sat, 16 April 2005 00:44
	Re: Using different knucklearms for diff camber	Super Jamie	Sat, 16 April 2005 01:08
	Re: Using different knucklearms for diff camber	takai	Sat, 16 April 2005 01:54
	Re: Using different knucklearms for diff camber	ta2272	Sat, 16 April 2005 02:35
	Re: Using different knucklearms for diff camber	Super Jamie	Sat, 16 April 2005 02:46
	Re: Using different knucklearms for diff camber	September_Squall	Sat, 16 April 2005 04:57
	Re: Using different knucklearms for diff camber	September_Squall	Sat, 16 April 2005 05:03
	Re: Using different knucklearms for diff camber	ta2272	Sat, 16 April 2005 05:50
	Re: Using different knucklearms for diff camber	Super Jamie	Sat, 16 April 2005 06:57
	Re: Using different knucklearms for diff camber	ta2272	Sat, 16 April 2005 09:54
	Re: Using different knucklearms for diff camber	September_Squall	Sat, 16 April 2005 13:08
	Re: Using different knucklearms for diff camber	Super Jamie	Sun, 17 April 2005 00:01
	Re: Using different knucklearms for diff camber	wilbo666	Sun, 17 April 2005 02:04
	Re: Using different knucklearms for diff camber	ta2272	Sun, 17 April 2005 03:16
	Re: Using different knucklearms for diff camber	styler	Sun, 17 April 2005 03:17
	Re: Using different knucklearms for diff camber	oldcorollas	Mon, 18 April 2005 13:00
	Re: Using different knucklearms for diff camber	indigoid	Tue, 19 April 2005 10:53
	Re: Using different knucklearms for diff camber	Super Jamie	Tue, 19 April 2005 22:29

Previous Topic:	14" tyres - opinions please
Next Topic:	MA61 Diff Swap?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.