| Author | Topic |
|---|
Location:
Pocatello, Idaho, USA
Registered:
December 2002
|
 Re: parts for 4A-GE needed
|
Wed, 11 December 2002 22:01
 
|
 |
Hey Grega,
Thanks for the help buddy. About the oil-pan, yeah I need a center sump pan because the cross-member in the American models is different from the Australian models. The cross-member curves to the front of the car instead of the back. All my research has led me to believe this because everyone at toymods tells me that I need the front sump pan. I have changed motors twice already and currently have a 20R in it, which has a center sump pan. I did plan on building an intake manifold that will fit four (4) Mikuni carbs. And I have an exhaust header for a '85 Corolla GTS on the way that I hope will fit. I'm not sure if I have a T-50 trany but I do know it came out of a '86 Corolla GTS. But I got the throwout bearing from an 18R-C modified to work. I do have a plan for the cooling setup and have most the parts I need. As far as I know, there was never a model of the Sprinter made for America, but I think the Corolla GTS (RWD) is the closest thing to it, because most my parts came from this kind of car. About the distributor, will the one off the fuel injected 4A-GZE work. That's what I have and also what the head came off of. I can build everything else but the distributor so that is the most important thing. Thanks again for the help and please get back to me as soon as possible because I plan on starting my project over christmas break. Thanks
Oh, yeah. My Celica is a 1971 RA20. I have not seen this model on toymods yet but I think it's just the difference in the Australian models and the American models.
|
|
|
| | Subject | Poster | Date |
|---|
 |
parts for 4A-GE needed
|
CelicaMan | Fri, 06 December 2002 22:18 |
|
Re: parts for 4A-GE needed
|
CelicaMan | Tue, 10 December 2002 21:30 |
|
Re: parts for 4A-GE needed
|
Grega | Wed, 11 December 2002 00:47 |
|
Re: parts for 4A-GE needed
|
CelicaMan | Wed, 11 December 2002 22:01 |
|
Re: parts for 4A-GE needed
|
CelicaMan | Tue, 17 December 2002 20:30 |
|
Re: parts for 4A-GE needed
|
._T_. | Tue, 17 December 2002 23:27 |
|
Re: parts for 4A-GE needed
|
Grega | Wed, 18 December 2002 02:15 |
|
Re: parts for 4A-GE needed
|
CelicaMan | Wed, 18 December 2002 22:20 |
|
Re: parts for 4A-GE needed
|
Grega | Wed, 18 December 2002 23:02 |
|
Re: parts for 4A-GE needed
|
._T_. | Thu, 19 December 2002 01:45 |
|
Re: parts for 4A-GE needed
|
CelicaMan | Thu, 19 December 2002 22:30 |
|
Re: parts for 4A-GE needed
|
Grega | Fri, 20 December 2002 01:31 |
|
Re: parts for 4A-GE needed
|
._T_. | Fri, 20 December 2002 03:24 |
|
Re: parts for 4A-GE needed
|
CelicaMan | Sun, 22 December 2002 20:39 |
