Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » Purchasing 3T-GTE and Not started in 2 years, Please help!

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
thechuckster
Forums Junkie


Location:
Brisbane
Registered:
February 2003
 
Re: Purchasing 3T-GTE and Not started in 2 years, Please help! Mon, 18 April 2005 02:36 Go to previous message
if you're worried about dry bearings and/or rings stuck to the bores, can i suggest that before running the engine (e.g. fuel & spark) you:
-drain the crankcase of oil/fluids
-re-fill it with about 8-10 litres of diesel fuel (yes, diesel) so the crank is partly in the fluid
-attach a cheap oil filter
-take rocker-cover off and coat cam/rocker gear with same
-squirt machine oil or other fine & light oil into the bores via the plug holes
-with a spanner, rotate the engine via the crank pulley to get oil on all the bores and around the crank bearings adn other wearing surfaces
-using the starter motor, crank the engine until you have oil constant oil pressure (easiest to attch a guage to the sender port

once the battery is flat or you feel confident that there's oil thru-out the motor, dump the diesel and re-fill with proper engine oil and replace the cheapo oil filter with a genuine article.

if you feel brave, you could even run the engine for a few minutes using diesel as lubricant - the detergents in that fuel will do a great job of removing gunk from the oil galleries and bearing faces.

now that i think about, there's probably an old thread on this topic as i remember some discussion about whether running the engin on diesel was safe or not.

Also - do similar thing with the cooling system as the first run/warmup will dislodge large amounts of corrosion/powdery gunk which will pollute the radiator and coolant.
  Send a private message to this user    

SubjectPosterDate
Read Message   Purchasing 3T-GTE and Not started in 2 years, Please help! NAJJESun, 17 April 2005 09:56
Read Message   Re: Purchasing 3T-GTE and Not started in 2 years, Please help! riceburna73Sun, 17 April 2005 10:13
Read Message   Re: Purchasing 3T-GTE and Not started in 2 years, Please help! justcallmefrankSun, 17 April 2005 12:45
Read Message   Re: Purchasing 3T-GTE and Not started in 2 years, Please help! ToobsSun, 17 April 2005 23:45
Read Message   Re: Purchasing 3T-GTE and Not started in 2 years, Please help! NAJJEMon, 18 April 2005 01:23
Read Message   Re: Purchasing 3T-GTE and Not started in 2 years, Please help! ToobsMon, 18 April 2005 02:00
Read Message   Re: Purchasing 3T-GTE and Not started in 2 years, Please help!  thechucksterMon, 18 April 2005 02:36
Previous Topic:HELP: Engine Hesitating + cutting out etc.... 1JZ
Next Topic:ST162 - Clunky noises while driving/accelerating?

Goto Forum:
-=] Back to Top [=-

Current Time: Sat Nov 16 06:53:45 UTC 2024

Total time taken to generate the page: 0.0059418678283691 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.