| Author | Topic |
|---|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 2TGEU head on a 3TGTE bottomend
|
Fri, 13 December 2002 04:20
 
|
 |
Josh/Fly PSI,
I assume you are both thinging of a Turbo Hybrid 2TG/3TGEU ?
Yes the heads fit on Valve releifs can easily be worked out by a decent Engine Builder. Also depends on the compression your going to run. Ie Domed top piston needs a bigger releif to a flat top Piston.
Other thing is then what cams and ECU you will be running. I don't know that the Stock 3TGTE computer could handle the 2TGEU cams.
Depending on your time frame you may be able to see how mine goes. (Yes thats what I have been building since August last year  )
There is also another one being built in the gong as we speak !
|
|
|
| | Subject | Poster | Date |
|---|
 |
2TGEU head on a 3TGTE bottomend
|
FLY PSI | Wed, 11 December 2002 12:45 |
|
Re: 2TGEU head on a 3TGTE bottomend
|
EMP-2TG | Thu, 12 December 2002 06:15 |
|
Re: 2TGEU head on a 3TGTE bottomend
|
Norbie | Thu, 12 December 2002 06:20 |
|
Re: 2TGEU head on a 3TGTE bottomend
|
EMP-2TG | Thu, 12 December 2002 06:26 |
|
Re: 2TGEU head on a 3TGTE bottomend
|
FLY PSI | Thu, 12 December 2002 09:10 |
|
Re: 2TGEU head on a 3TGTE bottomend
|
thetoyman75 | Fri, 13 December 2002 04:20 |
|
Re: 2TGEU head on a 3TGTE bottomend
|
YOGI8U | Fri, 13 December 2002 04:28 |
|
Re: 2TGEU head on a 3TGTE bottomend
|
thetoyman75 | Fri, 13 December 2002 05:04 |
|
Re: 2TGEU head on a 3TGTE bottomend
|
thetoyman75 | Fri, 13 December 2002 05:24 |
|
Re: 2TGEU head on a 3TGTE bottomend
|
EMP-2TG | Fri, 13 December 2002 07:22 |
|
Re: 2TGEU head on a 3TGTE bottomend
|
FLY PSI | Fri, 13 December 2002 11:49 |
