| Author | Topic |
|---|
I supported Toymods
Location:
Perth
Registered:
July 2004
|
|
Modifying 7MGTE Internals
|
Wed, 20 April 2005 06:51
|
 |
My Head Gasket is still fine, but id rather blow the head off the snake from 100m away before it comes to bite me if you get my drift. Thus im going to get the whole thing done properly..
Mind you with the pain that its going to cause my by decking the block and machining it and all the rest. Ive decided that i only ever want to pull the block out once in the next 5 years so any internal modifications i want to make are going to get done at the same time that i do my Head Gasket.
So..
This is the list of what ive got in mind to chuck into it (I'll order it from the US next month)
- JE Forged Pistons (.020 Over) - $750ish USD (Rings Included)
- Crower Forged Billet Rods - $980ish USD
- GReddy 2mm MHG (85mm Bore) - $175 USD
- ARP Head Studs - $119 USD
My question here is what else should i be ordering to change internally so that i dont need to pull the head apart again for literally the life of the car... Valves? Etc..?
Recommendations?
|
|
|
| | Subject | Poster | Date |
|---|
 |
Modifying 7MGTE Internals
|
hamgatan | Wed, 20 April 2005 06:51 |
|
Re: Modifying 7MGTE Internals
|
CrUZsida | Wed, 20 April 2005 07:15 |
|
Re: Modifying 7MGTE Internals
|
hamgatan | Wed, 20 April 2005 07:25 |
|
Re: Modifying 7MGTE Internals
|
hamgatan | Wed, 20 April 2005 07:30 |
|
Re: Modifying 7MGTE Internals
|
CrUZsida | Wed, 20 April 2005 07:33 |
|
Re: Modifying 7MGTE Internals
|
hamgatan | Wed, 20 April 2005 07:42 |
|
Re: Modifying 7MGTE Internals
|
CrUZsida | Wed, 20 April 2005 07:32 |
|
Re: Modifying 7MGTE Internals
|
BlackSupra | Wed, 20 April 2005 07:58 |
|
Re: Modifying 7MGTE Internals
|
CrUZsida | Wed, 20 April 2005 08:27 |
|
Re: Modifying 7MGTE Internals
|
hamgatan | Wed, 20 April 2005 09:13 |
|
Re: Modifying 7MGTE Internals
|
bbaacchhyy | Wed, 20 April 2005 22:45 |
|
Re: Modifying 7MGTE Internals
|
hamgatan | Thu, 21 April 2005 00:45 |
|
Re: Modifying 7MGTE Internals
|
CrUZsida | Wed, 20 April 2005 07:50 |
|
Re: Modifying 7MGTE Internals
|
hamgatan | Wed, 20 April 2005 07:55 |
|
Re: Modifying 7MGTE Internals
|
CrUZsida | Wed, 20 April 2005 09:20 |
|
Re: Modifying 7MGTE Internals
|
CrUZsida | Thu, 21 April 2005 00:55 |
|
Re: Modifying 7MGTE Internals
|
bbaacchhyy | Thu, 21 April 2005 01:05 |
|
Re: Modifying 7MGTE Internals
|
hamgatan | Thu, 21 April 2005 01:24 |
|
Re: Modifying 7MGTE Internals
|
Allan | Thu, 21 April 2005 01:14 |
|
Re: Modifying 7MGTE Internals
|
Allan | Thu, 21 April 2005 06:18 |
|
Re: Modifying 7MGTE Internals
|
CrUZsida | Thu, 21 April 2005 06:28 |
|
Re: Modifying 7MGTE Internals
|
Allan | Thu, 21 April 2005 06:31 |
|
Re: Modifying 7MGTE Internals
|
Chris Davey | Thu, 21 April 2005 12:09 |
|
Re: Modifying 7MGTE Internals
|
bbaacchhyy | Fri, 22 April 2005 03:05 |
|
Re: Modifying 7MGTE Internals
|
hamgatan | Fri, 22 April 2005 03:36 |
|
Re: Modifying 7MGTE Internals
|
HKS_TRD | Fri, 22 April 2005 17:50 |
