| Author | Topic |
|---|
Location:
Brisbane
Registered:
April 2004
|
|
using 16r rods to stroke a 18r
|
Thu, 21 April 2005 03:12
|
 |
|
does this sound about right using 16r rods with 22re pistons into an 18r block would make it 2.4L because 22re pistons are 94mm but sit abot 2mm below 18r deck hight so i heard by using 16r rods it pushes the piston back up to deck height.
|
|
|
| | Subject | Poster | Date |
|---|
 |
using 16r rods to stroke a 18r
|
ra_28 | Thu, 21 April 2005 03:12 |
|
Re: using 16r rods to stroke a 18r
|
81LOWLUX | Thu, 21 April 2005 03:19 |
|
Re: using 16r rods to stroke a 18r
|
THE WITZL | Thu, 21 April 2005 03:29 |
|
Re: using 16r rods to stroke a 18r
|
ra_28 | Thu, 21 April 2005 03:40 |
|
Re: using 16r rods to stroke a 18r
|
81LOWLUX | Thu, 21 April 2005 03:45 |
|
Re: using 16r rods to stroke a 18r
|
Mr DOHC | Thu, 21 April 2005 07:34 |
|
Re: using 16r rods to stroke a 18r
|
ra_28 | Thu, 21 April 2005 10:10 |
|
Re: using 16r rods to stroke a 18r
|
Mr DOHC | Thu, 21 April 2005 11:23 |
|
Re: using 16r rods to stroke a 18r
|
barned01 | Thu, 21 April 2005 14:45 |
|
Re: using 16r rods to stroke a 18r
|
THE WITZL | Thu, 21 April 2005 21:46 |
|
Re: using 16r rods to stroke a 18r
|
ra_28 | Fri, 22 April 2005 00:15 |
|
Re: using 16r rods to stroke a 18r
|
barned01 | Fri, 22 April 2005 00:21 |
|
Re: using 16r rods to stroke a 18r
|
Mr DOHC | Fri, 22 April 2005 06:59 |
