| Author | Topic |
|---|
Location:
Brisbane
Registered:
October 2002
|
|
Re: using 16r rods to stroke a 18r
|
Thu, 21 April 2005 07:34
 
|
 |
22R pistons are 92mm, and only go to 93mm {acl tho}
using the 22r crank and a 92mm bore is 2366.55cc.
by the way, i'm picking up a 92mm bore block on monday  , sparie
|
|
|
| | Subject | Poster | Date |
|---|
 |
using 16r rods to stroke a 18r
|
ra_28 | Thu, 21 April 2005 03:12 |
|
Re: using 16r rods to stroke a 18r
|
81LOWLUX | Thu, 21 April 2005 03:19 |
|
Re: using 16r rods to stroke a 18r
|
THE WITZL | Thu, 21 April 2005 03:29 |
|
Re: using 16r rods to stroke a 18r
|
ra_28 | Thu, 21 April 2005 03:40 |
|
Re: using 16r rods to stroke a 18r
|
81LOWLUX | Thu, 21 April 2005 03:45 |
|
Re: using 16r rods to stroke a 18r
|
Mr DOHC | Thu, 21 April 2005 07:34 |
|
Re: using 16r rods to stroke a 18r
|
ra_28 | Thu, 21 April 2005 10:10 |
|
Re: using 16r rods to stroke a 18r
|
Mr DOHC | Thu, 21 April 2005 11:23 |
|
Re: using 16r rods to stroke a 18r
|
barned01 | Thu, 21 April 2005 14:45 |
|
Re: using 16r rods to stroke a 18r
|
THE WITZL | Thu, 21 April 2005 21:46 |
|
Re: using 16r rods to stroke a 18r
|
ra_28 | Fri, 22 April 2005 00:15 |
|
Re: using 16r rods to stroke a 18r
|
barned01 | Fri, 22 April 2005 00:21 |
|
Re: using 16r rods to stroke a 18r
|
Mr DOHC | Fri, 22 April 2005 06:59 |
