| Author | Topic |
|---|
Location:
Adelaide
Registered:
September 2003
|
|
Re: using 16r rods to stroke a 18r
|
Thu, 21 April 2005 14:45
 
|
 |
i have the bearings sitting here, they are suitable for:
conrod bearings - 6r, 7r, 8r, 16r, 18r, 18rg, 20r, 21r, 22r
main bearings - 16r, 18r
so the main bearings must be the different ones, could get it machined down though, i was quoted 280 odd to fix the conrod journals for an 18rg crank but i don't know if it is cheaper for the main journals.
|
|
|
| | Subject | Poster | Date |
|---|
 |
using 16r rods to stroke a 18r
|
ra_28 | Thu, 21 April 2005 03:12 |
|
Re: using 16r rods to stroke a 18r
|
81LOWLUX | Thu, 21 April 2005 03:19 |
|
Re: using 16r rods to stroke a 18r
|
THE WITZL | Thu, 21 April 2005 03:29 |
|
Re: using 16r rods to stroke a 18r
|
ra_28 | Thu, 21 April 2005 03:40 |
|
Re: using 16r rods to stroke a 18r
|
81LOWLUX | Thu, 21 April 2005 03:45 |
|
Re: using 16r rods to stroke a 18r
|
Mr DOHC | Thu, 21 April 2005 07:34 |
|
Re: using 16r rods to stroke a 18r
|
ra_28 | Thu, 21 April 2005 10:10 |
|
Re: using 16r rods to stroke a 18r
|
Mr DOHC | Thu, 21 April 2005 11:23 |
|
Re: using 16r rods to stroke a 18r
|
barned01 | Thu, 21 April 2005 14:45 |
|
Re: using 16r rods to stroke a 18r
|
THE WITZL | Thu, 21 April 2005 21:46 |
|
Re: using 16r rods to stroke a 18r
|
ra_28 | Fri, 22 April 2005 00:15 |
|
Re: using 16r rods to stroke a 18r
|
barned01 | Fri, 22 April 2005 00:21 |
|
Re: using 16r rods to stroke a 18r
|
Mr DOHC | Fri, 22 April 2005 06:59 |
