F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 1JZ install in GZ20 Soarer Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
JAZE Forums Junkie Location: cronulla Registered: September 2002	Re: 1JZ install in GZ20 Soarer Sun, 24 April 2005 15:32 not flaming man, and the comments arent personal, I have been pmed/emailed by many people who are halfway through the conversion having issues and have had custom everything made and have wasted countless dollars. not sure what your sitch was. my half cut cost me 1500 dollars all up after I paid for it and then sold all the bits I didnt need. and im am continually surprised by the amount of people that attempt this conversion before finding out the basic fact that the MZ and MA/JZA chassis are identical and that a JZA70 halfcut makes for a bolt in job. Itt may be a little cheaper not to buy a halfcut but jacking the car and halfcut up and wheeling crossmeber out of one and into another then lowering the body onto it and bolting it all up is alot easier than the alternative methodsthat can be had. ( and for those that whinge of not having a hoist, this was done with stands and trolley jacks. [Report message to a moderator]

	Subject	Poster	Date
	1JZ install in GZ20 Soarer	Matt M	Wed, 20 April 2005 23:49
	Re: 1JZ install in GZ20 Soarer	Matt M	Thu, 21 April 2005 09:52
	Re: 1JZ install in GZ20 Soarer	FASTFOO	Thu, 21 April 2005 12:32
	Re: 1JZ install in GZ20 Soarer	Matt M	Thu, 21 April 2005 18:59
	Re: 1JZ install in GZ20 Soarer	jackel	Thu, 21 April 2005 19:13
	Re: 1JZ install in GZ20 Soarer	Merudo	Thu, 21 April 2005 23:40
	Re: 1JZ install in GZ20 Soarer	Skip	Thu, 21 April 2005 23:55
	Re: 1JZ install in GZ20 Soarer	HyDrA	Thu, 21 April 2005 23:57
	Re: 1JZ install in GZ20 Soarer	Matt M	Fri, 22 April 2005 02:35
	Re: 1JZ install in GZ20 Soarer	MR 1JZ	Fri, 22 April 2005 03:13
	Re: 1JZ install in GZ20 Soarer	Matt M	Fri, 22 April 2005 04:49
	Re: 1JZ install in GZ20 Soarer	Skip	Fri, 22 April 2005 06:05
	Re: 1JZ install in GZ20 Soarer	Matt M	Fri, 22 April 2005 07:07
	Re: 1JZ install in GZ20 Soarer	Chris Davey	Fri, 22 April 2005 10:07
	Re: 1JZ install in GZ20 Soarer	thechuckster	Sat, 23 April 2005 00:47
	Re: 1JZ install in GZ20 Soarer	Matt M	Sat, 23 April 2005 01:31
	Re: 1JZ install in GZ20 Soarer	acmtt	Sun, 24 April 2005 02:41
	Re: 1JZ install in GZ20 Soarer	takai	Fri, 22 April 2005 10:48
	Re: 1JZ install in GZ20 Soarer	Skip	Fri, 22 April 2005 15:20
	Re: 1JZ install in GZ20 Soarer	MR 1JZ	Fri, 22 April 2005 16:26
	Re: 1JZ install in GZ20 Soarer	Matt M	Fri, 22 April 2005 22:37
	Re: 1JZ install in GZ20 Soarer	Matt M	Sun, 24 April 2005 04:48
	Re: 1JZ install in GZ20 Soarer	MR 1JZ	Sun, 24 April 2005 05:02
	Re: 1JZ install in GZ20 Soarer	Matt M	Sun, 24 April 2005 05:20
	Re: 1JZ install in GZ20 Soarer	MR 1JZ	Sun, 24 April 2005 05:41
	Re: 1JZ install in GZ20 Soarer	Matt M	Sun, 24 April 2005 05:47
	Re: 1JZ install in GZ20 Soarer	MR 1JZ	Sun, 24 April 2005 05:49
	Re: 1JZ install in GZ20 Soarer	Matt M	Sun, 24 April 2005 05:57
	Re: 1JZ install in GZ20 Soarer	acmtt	Sun, 24 April 2005 06:27
	Re: 1JZ install in GZ20 Soarer	Matt M	Sun, 24 April 2005 07:23
	Re: 1JZ install in GZ20 Soarer	JAZE	Sun, 24 April 2005 14:30
	Re: 1JZ install in GZ20 Soarer	MR 1JZ	Sun, 24 April 2005 14:40
	Re: 1JZ install in GZ20 Soarer	JAZE	Sun, 24 April 2005 15:32
	Re: 1JZ install in GZ20 Soarer	Matt M	Mon, 25 April 2005 00:20
	Re: 1JZ install in GZ20 Soarer	MR 1JZ	Mon, 25 April 2005 08:23
	Re: 1JZ install in GZ20 Soarer	TT_50AR	Mon, 25 April 2005 15:47
	Re: 1JZ install in GZ20 Soarer	4agte	Sat, 07 May 2005 11:17
	Re: 1JZ install in GZ20 Soarer	Merudo	Sat, 07 May 2005 09:02
	Re: 1JZ install in GZ20 Soarer	MR 1JZ	Sat, 07 May 2005 09:04
	Re: 1JZ install in GZ20 Soarer	Merudo	Sat, 07 May 2005 09:05
	Re: 1JZ install in GZ20 Soarer	sideshow	Sat, 07 May 2005 10:12
	Re: 1JZ install in GZ20 Soarer	Matt M	Tue, 17 May 2005 19:14
	Re: 1JZ install in GZ20 Soarer	Chris Davey	Wed, 18 May 2005 04:17
	Re: 1JZ install in GZ20 Soarer	Matt M	Wed, 18 May 2005 09:33

Previous Topic:	sealed beam => halogen conversion gone wrong....
Next Topic:	Conversion from US 3SGTE (91) to JAP 3SGTE (94)

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.