| Author | Topic |
|---|
Toymods Social Secretary
Location:
Sydney
Registered:
July 2002
|
|
Re: Ae101 4agze into ae92 conversion - wiring issues
|
Mon, 25 April 2005 08:22
 
|
 |
in the gze conversion i did, i ONLY used the loom from the front cut which started at the ECU with the two ecu plugs, and those two body loom plugs i mentioned...... this is the engine loom.
Now yes some parts are connected to other bits in the engine bay... simply unplug these and note where they came from.
Of course you also need the 3rd ECU plug... i separated this from the body loom so that it came with the engine loom (this plug has some wires from engine, and some from body.
Now just label everything. The bits of the engine loom which connect to the body are only simple things like alternator power output, IGN (via EFI main relay, you can still use the one in your car), and one or two other things.
I have the pic, but its from my dodgy scrap book which usually only i can understand.... (note 800k pic)
http://www.witzl.com/tech/body loom plugs pinouts.jpg
|
|
|
