| Author | Topic |
|---|
Location:
Sydney, OZ
Registered:
May 2002
|
|
Re: Anyone here stroked/overbored a 4A-GZE effectively?
|
Mon, 16 December 2002 08:09
|
 |
Well, The 7AGE should look like this...
 This is the one I currently have close to completion.
For your sake, their are a few differences worth noting. Pistons, use the same ones for that head, ie GE pistons with GE Head. Since you want a GZE, use the GZE pistons and head, or aftermarket forgies will cost over $1100. Also GE/GZE pistons are a Floating type, While the FE has interference fitting Pistons, So the FE rods need a slight mod to fit GE/GZE pistons. T/Belt, Yes the 944 is needed as 7A is a taller block. Price wise, So far The most expensive one I have bought has been a 10,000km Jap import @$750, If you look around, you can get them (As a dud) for as little as $150-200.
Yes , vernier gears would be smart, get the head cleaned up, ported, ($660) etc. Your standard ECU will hold up in standard form but with cams, extra boost, I would recommend an aftermarket ECU.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Anyone here stroked/overbored a 4A-GZE effectively?
|
Esteban | Sun, 08 December 2002 10:41 |
|
Re: Anyone here stroked/overbored a 4A-GZE effectively?
|
Cool1 | Sun, 08 December 2002 11:49 |
|
Re: Anyone here stroked/overbored a 4A-GZE effectively?
|
Esteban | Tue, 10 December 2002 04:37 |
|
Re: Anyone here stroked/overbored a 4A-GZE effectively?
|
Youngy | Sun, 08 December 2002 12:02 |
|
Re: Anyone here stroked/overbored a 4A-GZE effectively?
|
Johnny | Tue, 10 December 2002 06:19 |
|
Re: Anyone here stroked/overbored a 4A-GZE effectively?
|
Cool1 | Tue, 10 December 2002 07:52 |
|
Re: Anyone here stroked/overbored a 4A-GZE effectively?
|
Sprocket | Wed, 11 December 2002 05:45 |
|
Re: Anyone here stroked/overbored a 4A-GZE effectively?
|
TE72_Turbo | Wed, 11 December 2002 12:47 |
|
Re: Anyone here stroked/overbored a 4A-GZE effectively?
|
mrshin | Wed, 11 December 2002 13:21 |
|
Re: Anyone here stroked/overbored a 4A-GZE effectively?
|
TE72_Turbo | Thu, 12 December 2002 11:53 |
|
Re: Anyone here stroked/overbored a 4A-GZE effectively?
|
Esteban | Thu, 12 December 2002 11:58 |
|
Re: Anyone here stroked/overbored a 4A-GZE effectively?
|
Johnny | Fri, 13 December 2002 06:00 |
|
Re: Anyone here stroked/overbored a 4A-GZE effectively?
|
Sprocket | Fri, 13 December 2002 06:19 |
|
Re: Anyone here stroked/overbored a 4A-GZE effectively?
|
Esteban | Mon, 16 December 2002 06:41 |
|
Re: Anyone here stroked/overbored a 4A-GZE effectively?
|
Johnny | Mon, 16 December 2002 08:09 |
