F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » ECU Compatibility across models ? Tech advice needed. Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
gold28 Forums Junkie Location: Madrid - Spain Registered: August 2002	Re: ECU Compatibility across models ? Tech advice needed. Fri, 29 April 2005 03:44 the cel will only light up if the ecu reads an out of limits reading. Think of it like a low oil pressure light. You may have low oil volume for months before triggering the pressure light. That doesn't mean your motor is in good health though. You may have a dicky o2 sensor or temp sensor or both. These could cause it to run rich but they may still be within the ecu limits. Also the engine packages for each car vary with exhaust, inlet tuneing, cams etc depending on the vehicle weight, performance and packaging restrictions. Hence fuel and ignition mapping will vary for individual models. Point in case, I am currently running a gen2 long block with gen3 everything else. because the cams are different, the ecu will quite happily let it run with 19psi boost. Now I don't think Toyota would have considered that a "durable" limit for a gen2 motor. With the Gen3 block, the same ecu would only support 16psi before screaming help. [Report message to a moderator]

	Subject	Poster	Date
	ECU Compatibility across models ? Tech advice needed.	ra23celica	Wed, 27 April 2005 03:40
	Re: ECU Compatibility across models ? Tech advice needed.	CrUZsida	Wed, 27 April 2005 04:45
	Re: ECU Compatibility across models ? Tech advice needed.	ra23celica	Wed, 27 April 2005 05:07
	Re: ECU Compatibility across models ? Tech advice needed.	CrUZsida	Wed, 27 April 2005 05:11
	Re: ECU Compatibility across models ? Tech advice needed.	draven	Wed, 27 April 2005 05:14
	Re: ECU Compatibility across models ? Tech advice needed.	ra23celica	Wed, 27 April 2005 05:27
	Re: ECU Compatibility across models ? Tech advice needed.	draven	Wed, 27 April 2005 05:48
	Re: ECU Compatibility across models ? Tech advice needed.	ZZT231	Wed, 27 April 2005 05:50
	Re: ECU Compatibility across models ? Tech advice needed.	ra23celica	Wed, 27 April 2005 06:00
	Re: ECU Compatibility across models ? Tech advice needed.	CrUZsida	Wed, 27 April 2005 06:06
	Re: ECU Compatibility across models ? Tech advice needed.	ra23celica	Wed, 27 April 2005 06:11
	Re: ECU Compatibility across models ? Tech advice needed.	ZZT231	Wed, 27 April 2005 06:43
	Re: ECU Compatibility across models ? Tech advice needed.	ra23celica	Wed, 27 April 2005 06:54
	Re: ECU Compatibility across models ? Tech advice needed.	gold28	Fri, 29 April 2005 03:44
	Re: ECU Compatibility across models ? Tech advice needed.	ra23celica	Fri, 29 April 2005 04:21
	Re: ECU Compatibility across models ? Tech advice needed.	sideshow	Fri, 29 April 2005 08:34
	Re: ECU Compatibility across models ? Tech advice needed.	CrUZsida	Fri, 29 April 2005 08:38
	Re: ECU Compatibility across models ? Tech advice needed.	sideshow	Fri, 29 April 2005 09:42
	Re: ECU Compatibility across models ? Tech advice needed.	ra23celica	Fri, 29 April 2005 14:38
	Re: ECU Compatibility across models ? Tech advice needed.	THE WITZL	Fri, 29 April 2005 16:59
	Re: ECU Compatibility across models ? Tech advice needed.	ra23celica	Sat, 30 April 2005 00:06
	Re: ECU Compatibility across models ? Tech advice needed.	CrUZsida	Sat, 30 April 2005 01:22
	Re: ECU Compatibility across models ? Tech advice needed.	THE WITZL	Sat, 30 April 2005 02:23
	Re: ECU Compatibility across models ? Tech advice needed.	ra23celica	Sat, 30 April 2005 05:47

Previous Topic:	1JZ rear main seal, JZA70 steering rack boots and engine mounts.
Next Topic:	anyone have head/rod/main bolts for 7M, 3S, 2JZ, 4A, 22R

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.