| Author | Topic |
|---|
Location:
Brisbane
Registered:
April 2004
|
|
Re: electronic dizzy to suit 18rg
|
Sat, 30 April 2005 02:35
 
|
 |
|
If no one sell you one there not that hard to mod you can use 22re or 2tgeu internals just take the magnetic pick with the rotating base out take the pice wich has the four pick up points for the spark "the screw is located under the rotor cap" take it out remove the old bits out of your 18rg one and put the other bits in. That easy. All you have to do then is set the air gap on the magnetic pick up not hard either give it enough so that it just clears. take the little resistor off the side of the dizzy not needed and thats it done.
|
|
|
| | Subject | Poster | Date |
|---|
 |
electronic dizzy to suit 18rg
|
RA40Celica | Sat, 30 April 2005 01:15 |
|
Re: electronic dizzy to suit 18rg
|
ra_28 | Sat, 30 April 2005 02:35 |
|
Re: electronic dizzy to suit 18rg
|
o_man_ra23 | Sun, 01 May 2005 13:19 |
|
Re: electronic dizzy to suit 18rg
|
RA40Celica | Mon, 02 May 2005 03:40 |
|
Re: electronic dizzy to suit 18rg
|
ra_28 | Mon, 02 May 2005 05:21 |
|
Re: electronic dizzy to suit 18rg
|
ra_28 | Sun, 08 May 2005 07:44 |
|
Re: electronic dizzy to suit 18rg
|
RA40Celica | Mon, 02 May 2005 08:51 |
|
Re: electronic dizzy to suit 18rg
|
ra_28 | Mon, 02 May 2005 09:23 |
|
Re: electronic dizzy to suit 18rg
|
ra_28 | Mon, 02 May 2005 09:25 |
|
Re: electronic dizzy to suit 18rg
|
ra_28 | Mon, 02 May 2005 09:25 |
|
Re: electronic dizzy to suit 18rg
|
people100 | Tue, 03 May 2005 08:18 |
|
Re: electronic dizzy to suit 18rg
|
RA40Celica | Tue, 03 May 2005 08:25 |
|
Re: electronic dizzy to suit 18rg
|
mcostalos | Tue, 03 May 2005 08:59 |
|
Re: electronic dizzy to suit 18rg
|
drift86levin | Wed, 04 May 2005 01:58 |
|
Re: electronic dizzy to suit 18rg
|
o_man_ra23 | Wed, 04 May 2005 06:17 |
|
Re: electronic dizzy to suit 18rg
|
RA40Celica | Fri, 06 May 2005 07:04 |
|
Re: electronic dizzy to suit 18rg
|
RA40Celica | Sat, 07 May 2005 07:50 |
