| Author | Topic |
|---|
Location:
W.A
Registered:
May 2004
|
|
Re: wiring problems (ae86)
|
Sun, 01 May 2005 15:51
|
 |
Find the wire coming out of the gearbox, this will be the reverse selector switch.
Locate the plug, should be 2-wires.
Disconnect it, and short out the wires on the loom side (not gbox side) Easiest to just stuff a bit of wire into one terminal, bend and stuff the other end into the adjacent terminal.
Turn ignition ON
Now your reverse lights should be lit!
If they are not, then the problem is in the wiring/bulbs.
If they are, then the problem is in the gearbox.
Hope this helps!
|
|
|
