| Author | Topic |
|---|
Location:
Heathmont, Melbourne, Vic
Registered:
May 2004
|
|
Re: 2tg builders in Melbourne
|
Tue, 03 May 2005 12:59
 
|
 |
I've just built one, hasn't been started yet. All the machining was done by TDC engines, 5/13 Turbo Drv, Bayswater, 9720 7620. As I said, it hasn't been started but turns over by hand alright (they didn't assemble it).
The other place I've heard of is in Beech Street, Nunawading. I can't remember the name of the shop but Beech Street is really short and there's only one machine shop there, its not far from Kilsyth so take a drive. Apparently they used to do all the machine work for Sean Malony (?) the 2TG guy in Richmond (if your playing with 2TG's then you should have heard of him by now!!). I spoke to them a while ago and they seemed to be familiar with these engines, and their prices seemed OK.
For parts I found Pistons Auto Parts, 1/3 Power Road, Bayswater, 9729 9522, I dealt with Lindsay, were really helpful and knew these engines and the 3T conversion. He even had a look out the back cause he thought he still had a set of pistons already machined to suit (flycuts). And his price for a set of pistons was about $100 cheaper then Repco or Bursons for the exact same thing. Plus he knew the chain guides and timing bits.
PS. If your interested in a full factory EFI setup inc AFM, manifolds, ECU, and electronic dissy, or just after a bit of general info then feel free to call me on 0423 021 523
|
|
|
