F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Wiring loom problems (3TGTE) Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
AE25 Occasional Poster Location: Aucks NZ Registered: June 2002	Re: Wiring loom problems (3TGTE) Wed, 04 May 2005 09:22 digging up very old post here... just curious of some details.. roger.. those 3tgte injectors your certain are high impedance, can you remember if they were the same ones as inferno measured as 2ohm? ie # 0662 & 0668 i have also measured up some std 3tgte injectors with same part numbers as inferno. oil cooled had 195500-0662 injectors, measured around 1.7ohm water cooled had 195500-0668 injectors also measured around 1.7ohm i can confirm both sets work perfectly. have also chucked them in a factory std te71 2tgeu (that has 2.2ohm injectors and ballast resistor) and they run hella rich but still work fine up top end. also have noticed a trend on 3tgte ecu's ive seen so far, (but may not be a 100% correct assumption), that oil cooled versions have a big 31 sticker on ecu and water cooled have 32 sticker. [Report message to a moderator]

	Subject	Poster	Date
	Wiring loom problems (3TGTE)	inferno	Fri, 07 February 2003 00:43
	Re: Wiring loom problems (3TGTE)	roger	Fri, 07 February 2003 01:00
	Re: Wiring loom problems (3TGTE)	Norbie	Fri, 07 February 2003 01:07
	Re: Wiring loom problems (3TGTE)	inferno	Sat, 08 February 2003 22:40
	Re: Wiring loom problems (3TGTE)	CLG	Sun, 09 February 2003 04:13
	Re: Wiring loom problems (3TGTE)	inferno	Sun, 09 February 2003 05:05
	Re: Wiring loom problems (3TGTE)	CLG	Sun, 09 February 2003 09:56
	Re: Wiring loom problems (3TGTE)	Grant	Sun, 09 February 2003 21:27
	Re: Wiring loom problems (3TGTE)	inferno	Mon, 10 February 2003 22:32
	Re: Wiring loom problems (3TGTE)	inferno	Tue, 11 February 2003 05:53
	Re: Wiring loom problems (3TGTE)	roger	Wed, 12 February 2003 00:18
	Re: Wiring loom problems (3TGTE)	inferno	Wed, 12 February 2003 00:37
	Re: Wiring loom problems (3TGTE)	roger	Wed, 12 February 2003 01:08
	Re: Wiring loom problems (3TGTE)	inferno	Tue, 18 February 2003 08:04
	Re: Wiring loom problems (3TGTE)	clubagreenie	Tue, 18 February 2003 08:31
	Re: Wiring loom problems (3TGTE)	inferno	Wed, 19 February 2003 13:42
	Re: Wiring loom problems (3TGTE)	roger	Wed, 19 February 2003 22:05
	Re: Wiring loom problems (3TGTE)	roger	Wed, 19 February 2003 22:12
	Re: Wiring loom problems (3TGTE)	TurboRA28	Wed, 19 February 2003 22:49
	Re: Wiring loom problems (3TGTE)	inferno	Thu, 20 February 2003 00:18
	Re: Wiring loom problems (3TGTE)	roger	Thu, 20 February 2003 02:39
	Re: Wiring loom problems (3TGTE)	TurboRA28	Thu, 20 February 2003 03:19
	Re: Wiring loom problems (3TGTE)	roger	Thu, 20 February 2003 03:31
	Re: Wiring loom problems (3TGTE)	inferno	Thu, 20 February 2003 04:13
	Re: Wiring loom problems (3TGTE)	roger	Thu, 20 February 2003 04:51
	Re: Wiring loom problems (3TGTE)	TurboRA28	Thu, 20 February 2003 05:41
	Re: Wiring loom problems (3TGTE)	inferno	Thu, 20 February 2003 08:09
	Re: Wiring loom problems (3TGTE)	roger	Thu, 20 February 2003 21:33
	Re: Wiring loom problems (3TGTE)	TurboRA28	Thu, 20 February 2003 22:06
	Re: Wiring loom problems (3TGTE)	inferno	Thu, 20 February 2003 23:11
	Re: Wiring loom problems (3TGTE)	roger	Thu, 20 February 2003 23:35
	Re: Wiring loom problems (3TGTE)	CLG	Fri, 21 February 2003 04:46
	Re: Wiring loom problems (3TGTE)	inferno	Fri, 21 February 2003 14:02
	Re: Wiring loom problems (3TGTE)	AE25	Wed, 04 May 2005 09:22

Previous Topic:	Greddy Profec B Spec II Tuners in Canberra
Next Topic:	2tg piston hits valve after hibread makeover

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.