| Author | Topic |
|---|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: 2JZGTE in a MX13 rona....
|
Fri, 06 May 2005 06:31
 
|
 |
Here are my brakes:
330mm 28mm thick Mustang Cobra rotors with APRacing CP5200 calipers.
Rears are 307mm 18mm thick LS400 rotors with ST205 calipers.
Stops well from 200 kph (repeatedly).
Stock master cylinder is 15/16" and works fine.
Stock radiator is OK too, but remember this is NA. You'll be turbo and have a big intercooler out the front (which reminds me, there's not a lot of room out there for a really big one). An 80 series Landcruiser 4 core radiator is the same size so that's a potential upgrade.
|
|
|
| | Subject | Poster | Date |
|---|
 |
2JZGTE in a MX13 rona....
|
lobby69 | Fri, 06 May 2005 01:58 |
|
Re: 2JZGTE in a MX13 rona....
|
gianttomato | Fri, 06 May 2005 02:18 |
|
Re: 2JZGTE in a MX13 rona....
|
lobby69 | Fri, 06 May 2005 03:01 |
|
Re: 2JZGTE in a MX13 rona....
|
rob_RA40 | Fri, 06 May 2005 03:14 |
|
Re: 2JZGTE in a MX13 rona....
|
Norbie | Fri, 06 May 2005 03:57 |
|
Re: 2JZGTE in a MX13 rona....
|
rob_RA40 | Fri, 06 May 2005 04:35 |
|
Re: 2JZGTE in a MX13 rona....
|
gianttomato | Fri, 06 May 2005 05:03 |
|
Re: 2JZGTE in a MX13 rona....
|
lobby69 | Fri, 06 May 2005 05:30 |
|
Re: 2JZGTE in a MX13 rona....
|
Corona RT142 | Fri, 06 May 2005 05:32 |
|
Re: 2JZGTE in a MX13 rona....
|
lobby69 | Fri, 06 May 2005 05:36 |
|
Re: 2JZGTE in a MX13 rona....
|
gianttomato | Fri, 06 May 2005 06:31 |
|
Re: 2JZGTE in a MX13 rona....
|
Southo | Fri, 06 May 2005 10:31 |
|
Re: 2JZGTE in a MX13 rona....
|
draven | Fri, 06 May 2005 09:44 |
|
Re: 2JZGTE in a MX13 rona....
|
gianttomato | Fri, 06 May 2005 10:22 |
|
Re: 2JZGTE in a MX13 rona....
|
lobby69 | Fri, 06 May 2005 10:35 |
|
Re: 2JZGTE in a MX13 rona....
|
gianttomato | Sat, 07 May 2005 02:45 |
|
Re: 2JZGTE in a MX13 rona....
|
lobby69 | Sat, 07 May 2005 03:50 |
