F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 2tg dummy cam oil hole to cover or not......WHY? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
YelloRolla Forums Junkie Location: On your mum! Registered: May 2002	Re: 2tg dummy cam oil hole to cover or not......WHY? Fri, 06 May 2005 11:10 There are some variables to be considered. My engine gets 70psi at idle with cold engine oil and 20psi hot,(I am not sure that an Ozito 12V cordless drill will be able to drive the oil pump at that high loading though). So, turn it with the drill, tell us how many rpm's your fully hektik drill runs at and what oil pressure you managed to achieve and I (or somebody else here will try to offer if that is anywhere near suitable. Drastic = cutting hole in firewall with hole-saw and knocking out the welch plug at the back of the cam tunnel, getting bendy little torch and having a look. If it is still factory 2TG then they have little steel sticks across the bearing and plugging the hole. If no sticks and you can't see if the oil hole lines up, get a friend to drive your oil pump with the drill as previously outlined. [Report message to a moderator]

	Subject	Poster	Date
	2tg dummy cam oil hole to cover or not......WHY?	cwhelan	Wed, 04 May 2005 15:15
	Re: 2tg dummy cam oil hole to cover or not......WHY?	allencr	Wed, 04 May 2005 16:39
	Re: 2tg dummy cam oil hole to cover or not......WHY?	ke382TG	Thu, 05 May 2005 00:06
	Re: 2tg dummy cam oil hole to cover or not......WHY?	cwhelan	Thu, 05 May 2005 08:23
	Re: 2tg dummy cam oil hole to cover or not......WHY?	YelloRolla	Thu, 05 May 2005 09:06
	Re: 2tg dummy cam oil hole to cover or not......WHY?	cwhelan	Fri, 06 May 2005 00:25
	Re: 2tg dummy cam oil hole to cover or not......WHY?	thechuckster	Fri, 06 May 2005 03:21
	Re: 2tg dummy cam oil hole to cover or not......WHY?	cwhelan	Fri, 06 May 2005 07:51
	Re: 2tg dummy cam oil hole to cover or not......WHY?	YelloRolla	Fri, 06 May 2005 11:10
	Re: 2tg dummy cam oil hole to cover or not......WHY?	muaythaiman	Fri, 06 May 2005 11:17
	Re: 2tg dummy cam oil hole to cover or not......WHY?	YelloRolla	Fri, 06 May 2005 11:21
	Re: 2tg dummy cam oil hole to cover or not......WHY?	cwhelan	Mon, 09 May 2005 05:01
	Re: 2tg dummy cam oil hole to cover or not......WHY?	YelloRolla	Mon, 09 May 2005 05:07
	Re: 2tg dummy cam oil hole to cover or not......WHY?	cwhelan	Thu, 02 June 2005 07:44
	Re: 2tg dummy cam oil hole to cover or not......WHY?	jesseT18	Thu, 02 June 2005 07:49
	Re: 2tg dummy cam oil hole to cover or not......WHY?	cwhelan	Thu, 02 June 2005 22:33

Previous Topic:	GZ20 Pressure Plate
Next Topic:	locker diff

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.