| Author | Topic |
|---|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: 7mgte keep blowing HG, any help???
|
Sat, 07 May 2005 17:03
 
|
 |
a) theres nothing special about the #5 -#6 cyl wall gap... that excuse is pretty lame. bore spacing is equal, and though minimal, should be adequate for 99% of build ups
b) a MHG will fix the problem if:
- the head and block are surfaced PROPERLY
- theres not too much corrosion in the block/head water galleries
- you use Hylomar on the MHG
c) NEW stock head bolts should be torqued to 72ft/lbs only, with proper lube, not oil, not dry, in recently threaded block threads
d) if going ARP fasteners, follow thier guidlines, dont guess
e) thickness should be exactly the same as the HG coming out (1.2mm ??)
|
|
|
| | Subject | Poster | Date |
|---|
 |
7mgte keep blowing HG, any help???
|
Mr.TRIM | Sat, 07 May 2005 06:32 |
|
Re: 7mgte keep blowing HG, any help???
|
lobby69 | Sat, 07 May 2005 06:40 |
|
Re: 7mgte keep blowing HG, any help???
|
allencr | Sat, 07 May 2005 15:42 |
|
Re: 7mgte keep blowing HG, any help???
|
ed_ma61 | Sat, 07 May 2005 17:03 |
|
Re: 7mgte keep blowing HG, any help???
|
chrisss | Sun, 08 May 2005 11:13 |
|
Re: 7mgte keep blowing HG, any help???
|
ed_ma61 | Sun, 08 May 2005 16:09 |
|
Re: 7mgte keep blowing HG, any help???
|
Mr.TRIM | Mon, 09 May 2005 07:43 |
|
Re: 7mgte keep blowing HG, any help???
|
Allan | Mon, 09 May 2005 10:04 |
|
Re: 7mgte keep blowing HG, any help???
|
TerryOBeirne | Mon, 09 May 2005 12:05 |
|
Re: 7mgte keep blowing HG, any help???
|
YelloRolla | Mon, 09 May 2005 12:19 |
