| Author | Topic |
|---|
Location:
ACT
Registered:
April 2005
|
|
Re: 260z Conversion
|
Sun, 08 May 2005 00:18
 
|
 |
The 1uz, 1jz and 2jz will all fit, but its how you get them to fit,
The 1uz has mounts in the middle of the block and being a V8 isnt as long as a straight six - so the way ive seen folk mount this engine is way back in the engine bay and then welding new engine mounts to the chassis rails,
The 2jz ive seen mounted in a Zed was done by doing kinda the same thing,
The 1jz ive seen in a Zed just mounted the engine on custom made engine mounts which were closer to the front of the block, so was able to retain the original Datsun engine crossmember mounts,
With the 2jz because it's is taller i was wondering if there would be any issues with this engine hitting the bonnett if you try and mount the engine on the original engine crossmember mounts?
& Whether or not there is enough bolt holes on a 2jz close to the front of the block to be able to secure custom engine mounts (drivers side should be sweet, but the passenger side looks like it might be a drama),
The only way ill know for sure is putting a 1jz and 2jz engines side by side and taking some measurements and pics.............
Anyone know where i can do this in Canberra?
Just curious aswell - anyone know what is a good price to pay for a W58 Supra 5spd conversion to mate up to a 1jz/2jz engine?
(JZA80 bellhousing, W58 box, Clutch, Flywheel, Shifter, Tailshaft, Clutch fork.....etc...etc)
|
|
|
| | Subject | Poster | Date |
|---|
 |
260z Conversion
|
aussie260z | Fri, 06 May 2005 12:50 |
|
Re: 260z Conversion
|
river | Fri, 06 May 2005 13:04 |
|
Re: 260z Conversion
|
Draza | Fri, 06 May 2005 13:23 |
|
Re: 260z Conversion
|
Intensevil | Fri, 06 May 2005 17:01 |
|
Re: 260z Conversion
|
ed_ma61 | Fri, 06 May 2005 18:37 |
|
Re: 260z Conversion
|
4agte | Fri, 06 May 2005 22:34 |
|
Re: 260z Conversion
|
rb20det | Sat, 07 May 2005 01:28 |
|
Re: 260z Conversion
|
filthman | Sat, 07 May 2005 01:40 |
|
Re: 260z Conversion
|
4agte | Sat, 07 May 2005 05:57 |
|
Re: 260z Conversion
|
filthman | Sun, 08 May 2005 01:18 |
|
Re: 260z Conversion
|
aussie260z | Sat, 07 May 2005 03:41 |
|
Re: 260z Conversion
|
Rallystanza | Sat, 07 May 2005 05:17 |
|
Re: 260z Conversion
|
aussie260z | Sat, 07 May 2005 06:28 |
|
Re: 260z Conversion
|
4agte | Sat, 07 May 2005 06:43 |
|
Re: 260z Conversion
|
ed_ma61 | Sat, 07 May 2005 17:07 |
|
Re: 260z Conversion
|
4agte | Sun, 08 May 2005 13:30 |
|
Re: 260z Conversion
|
BlackSupra | Sat, 07 May 2005 08:22 |
|
Re: 260z Conversion
|
aussie260z | Sat, 07 May 2005 09:00 |
|
Re: 260z Conversion
|
thechuckster | Sat, 07 May 2005 09:53 |
|
Re: 260z Conversion
|
BlackSupra | Sat, 07 May 2005 09:57 |
|
Re: 260z Conversion
|
scrote | Sat, 07 May 2005 15:38 |
|
Re: 260z Conversion
|
aussie260z | Sun, 08 May 2005 00:18 |
|
Re: 260z Conversion
|
BlackSupra | Sun, 08 May 2005 00:30 |
|
Re: 260z Conversion
|
aussie260z | Sun, 08 May 2005 01:16 |
|
Re: 260z Conversion
|
BlackSupra | Sun, 08 May 2005 01:17 |
|
Re: 260z Conversion
|
aussie260z | Sun, 08 May 2005 01:21 |
|
Re: 260z Conversion
|
aussie260z | Sun, 08 May 2005 01:25 |
|
Re: 260z Conversion
|
BlackSupra | Sun, 08 May 2005 02:09 |
|
Re: 260z Conversion
|
mrshin | Sun, 08 May 2005 02:30 |
|
Re: 260z Conversion
|
BlackSupra | Sun, 08 May 2005 02:32 |
|
Re: 260z Conversion
|
aussie260z | Sun, 08 May 2005 02:54 |
|
Re: 260z Conversion
|
aussie260z | Sun, 08 May 2005 02:59 |
|
Re: 260z Conversion
|
gianttomato | Sun, 08 May 2005 07:13 |
|
Re: 260z Conversion
|
mrshin | Sun, 08 May 2005 12:10 |
|
Re: 260z Conversion
|
ed_ma61 | Sun, 08 May 2005 16:08 |
|
Re: 260z Conversion
|
4agte | Tue, 10 May 2005 02:46 |
|
Re: 260z Conversion
|
quest | Sun, 08 May 2005 19:02 |
|
Re: 260z Conversion
|
aussie260z | Mon, 09 May 2005 02:44 |
|
Re: 260z Conversion
|
aussie260z | Mon, 09 May 2005 03:03 |
|
Re: 260z Conversion
|
quest | Mon, 09 May 2005 06:04 |
|
Re: 260z Conversion
|
IRA11Y | Mon, 09 May 2005 09:32 |
|
Re: 260z Conversion
|
aussie260z | Tue, 10 May 2005 02:44 |
|
Re: 260z Conversion
|
mrshin | Tue, 10 May 2005 14:32 |
|
Re: 260z Conversion
|
aussie260z | Tue, 10 May 2005 23:28 |
|
Re: 260z Conversion
|
gianttomato | Tue, 10 May 2005 23:53 |
|
Re: 260z Conversion
|
Hodgie | Wed, 11 May 2005 04:03 |
|
Re: 260z Conversion
|
mrshin | Wed, 11 May 2005 14:33 |
|
Re: 260z Conversion
|
aussie260z | Thu, 12 May 2005 03:48 |
|
Re: 260z Conversion
|
Allan | Thu, 12 May 2005 03:54 |
|
Re: 260z Conversion
|
mrshin | Thu, 12 May 2005 14:11 |
|
Re: 260z Conversion
|
Allan | Thu, 12 May 2005 16:14 |
|
Re: 260z Conversion
|
mrshin | Sat, 14 May 2005 12:03 |
|
Re: 260z Conversion
|
aussie260z | Sat, 14 May 2005 09:44 |
|
Re: 260z Conversion
|
Norbie | Sat, 14 May 2005 11:27 |
|
Re: 260z Conversion
|
mrshin | Sat, 14 May 2005 12:01 |
|
Re: 260z Conversion
|
splatt | Tue, 05 July 2005 06:51 |
|
Re: 260z Conversion
|
aussie260z | Tue, 05 July 2005 07:34 |
| Current Time:
Fri Jul 18 06:04:30 UTC 2025 |
Total time taken to generate the page: 0.0096471309661865 seconds |
