| Author | Topic |
|---|
Registered:
August 2002
|
|
Re: 260z Conversion
|
Sun, 08 May 2005 00:30
 
|
 |
Well the picture above shows the mounting point is between cylinder 2-3. I'm pretty sure it won't go much further forward than this.
You will definetly need custom mounts made up regardless.
With the taller block, just need to drop it lower in the engine bay if its a clearance issue, but we have used identical set of mounts for a 1jzgte and a 2jzge in an MA61 supra. The 2j does sit alot higher, also due to the intake manifold across the head.
But if you can find the correct configuration sump to get around the crossmember, that would be your best starting point.
Front sump off a chaser is rare and hard to find, mid/rear is the most common off JZA80 supra's and true rear sump's are off crown's and can be difficult to find, but wouldnt fetch the price of the front sump.
As for all the components, flywheel $2-300, bellhousing $300, tailshaft will be custom, but a yoke could be picked up from an MA61 supra for nothing if you get one with a shagged center bearing.
Gearbox $300+, but if you can, see if you can pickup a manual from a JZA80 supra which will be W58, get the bellhousing, clutch slave and clutch fork all in one package.
Pickup a clutch off the shelf from an Exedy dealer.
Any shifter from a W58 box will suit, but will need modifications to fit a JZA80 supra box as they have a shifter exention mechanism that needs to be sorted out.
See here: http://www.norbie.net/Project2JZ/Phase9.htm
|
|
|
| | Subject | Poster | Date |
|---|
 |
260z Conversion
|
aussie260z | Fri, 06 May 2005 12:50 |
|
Re: 260z Conversion
|
river | Fri, 06 May 2005 13:04 |
|
Re: 260z Conversion
|
Draza | Fri, 06 May 2005 13:23 |
|
Re: 260z Conversion
|
Intensevil | Fri, 06 May 2005 17:01 |
|
Re: 260z Conversion
|
ed_ma61 | Fri, 06 May 2005 18:37 |
|
Re: 260z Conversion
|
4agte | Fri, 06 May 2005 22:34 |
|
Re: 260z Conversion
|
rb20det | Sat, 07 May 2005 01:28 |
|
Re: 260z Conversion
|
filthman | Sat, 07 May 2005 01:40 |
|
Re: 260z Conversion
|
4agte | Sat, 07 May 2005 05:57 |
|
Re: 260z Conversion
|
filthman | Sun, 08 May 2005 01:18 |
|
Re: 260z Conversion
|
aussie260z | Sat, 07 May 2005 03:41 |
|
Re: 260z Conversion
|
Rallystanza | Sat, 07 May 2005 05:17 |
|
Re: 260z Conversion
|
aussie260z | Sat, 07 May 2005 06:28 |
|
Re: 260z Conversion
|
4agte | Sat, 07 May 2005 06:43 |
|
Re: 260z Conversion
|
ed_ma61 | Sat, 07 May 2005 17:07 |
|
Re: 260z Conversion
|
4agte | Sun, 08 May 2005 13:30 |
|
Re: 260z Conversion
|
BlackSupra | Sat, 07 May 2005 08:22 |
|
Re: 260z Conversion
|
aussie260z | Sat, 07 May 2005 09:00 |
|
Re: 260z Conversion
|
thechuckster | Sat, 07 May 2005 09:53 |
|
Re: 260z Conversion
|
BlackSupra | Sat, 07 May 2005 09:57 |
|
Re: 260z Conversion
|
scrote | Sat, 07 May 2005 15:38 |
|
Re: 260z Conversion
|
aussie260z | Sun, 08 May 2005 00:18 |
|
Re: 260z Conversion
|
BlackSupra | Sun, 08 May 2005 00:30 |
|
Re: 260z Conversion
|
aussie260z | Sun, 08 May 2005 01:16 |
|
Re: 260z Conversion
|
BlackSupra | Sun, 08 May 2005 01:17 |
|
Re: 260z Conversion
|
aussie260z | Sun, 08 May 2005 01:21 |
|
Re: 260z Conversion
|
aussie260z | Sun, 08 May 2005 01:25 |
|
Re: 260z Conversion
|
BlackSupra | Sun, 08 May 2005 02:09 |
|
Re: 260z Conversion
|
mrshin | Sun, 08 May 2005 02:30 |
|
Re: 260z Conversion
|
BlackSupra | Sun, 08 May 2005 02:32 |
|
Re: 260z Conversion
|
aussie260z | Sun, 08 May 2005 02:54 |
|
Re: 260z Conversion
|
aussie260z | Sun, 08 May 2005 02:59 |
|
Re: 260z Conversion
|
gianttomato | Sun, 08 May 2005 07:13 |
|
Re: 260z Conversion
|
mrshin | Sun, 08 May 2005 12:10 |
|
Re: 260z Conversion
|
ed_ma61 | Sun, 08 May 2005 16:08 |
|
Re: 260z Conversion
|
4agte | Tue, 10 May 2005 02:46 |
|
Re: 260z Conversion
|
quest | Sun, 08 May 2005 19:02 |
|
Re: 260z Conversion
|
aussie260z | Mon, 09 May 2005 02:44 |
|
Re: 260z Conversion
|
aussie260z | Mon, 09 May 2005 03:03 |
|
Re: 260z Conversion
|
quest | Mon, 09 May 2005 06:04 |
|
Re: 260z Conversion
|
IRA11Y | Mon, 09 May 2005 09:32 |
|
Re: 260z Conversion
|
aussie260z | Tue, 10 May 2005 02:44 |
|
Re: 260z Conversion
|
mrshin | Tue, 10 May 2005 14:32 |
|
Re: 260z Conversion
|
aussie260z | Tue, 10 May 2005 23:28 |
|
Re: 260z Conversion
|
gianttomato | Tue, 10 May 2005 23:53 |
|
Re: 260z Conversion
|
Hodgie | Wed, 11 May 2005 04:03 |
|
Re: 260z Conversion
|
mrshin | Wed, 11 May 2005 14:33 |
|
Re: 260z Conversion
|
aussie260z | Thu, 12 May 2005 03:48 |
|
Re: 260z Conversion
|
Allan | Thu, 12 May 2005 03:54 |
|
Re: 260z Conversion
|
mrshin | Thu, 12 May 2005 14:11 |
|
Re: 260z Conversion
|
Allan | Thu, 12 May 2005 16:14 |
|
Re: 260z Conversion
|
mrshin | Sat, 14 May 2005 12:03 |
|
Re: 260z Conversion
|
aussie260z | Sat, 14 May 2005 09:44 |
|
Re: 260z Conversion
|
Norbie | Sat, 14 May 2005 11:27 |
|
Re: 260z Conversion
|
mrshin | Sat, 14 May 2005 12:01 |
|
Re: 260z Conversion
|
splatt | Tue, 05 July 2005 06:51 |
|
Re: 260z Conversion
|
aussie260z | Tue, 05 July 2005 07:34 |
| Current Time:
Sat Jul 5 04:04:13 UTC 2025 |
Total time taken to generate the page: 0.0059390068054199 seconds |
