F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 260z Conversion Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
BlackSupra Forums Junkie Registered: August 2002	Re: 260z Conversion Sun, 08 May 2005 02:09 approx 540mm high from the top of the step at the rear of the block (seen in the pic above as the little triangular section at rear of block) to the top of the crossover pipe on for the intake. The sump is then 90mm deep at the front and 60mm deep at the rear (this is with a front sump), and these heights are additional to the block and motor heights measured above. [Report message to a moderator]

	Subject	Poster	Date
	260z Conversion	aussie260z	Fri, 06 May 2005 12:50
	Re: 260z Conversion	river	Fri, 06 May 2005 13:04
	Re: 260z Conversion	Draza	Fri, 06 May 2005 13:23
	Re: 260z Conversion	Intensevil	Fri, 06 May 2005 17:01
	Re: 260z Conversion	ed_ma61	Fri, 06 May 2005 18:37
	Re: 260z Conversion	4agte	Fri, 06 May 2005 22:34
	Re: 260z Conversion	rb20det	Sat, 07 May 2005 01:28
	Re: 260z Conversion	filthman	Sat, 07 May 2005 01:40
	Re: 260z Conversion	4agte	Sat, 07 May 2005 05:57
	Re: 260z Conversion	filthman	Sun, 08 May 2005 01:18
	Re: 260z Conversion	aussie260z	Sat, 07 May 2005 03:41
	Re: 260z Conversion	Rallystanza	Sat, 07 May 2005 05:17
	Re: 260z Conversion	aussie260z	Sat, 07 May 2005 06:28
	Re: 260z Conversion	4agte	Sat, 07 May 2005 06:43
	Re: 260z Conversion	ed_ma61	Sat, 07 May 2005 17:07
	Re: 260z Conversion	4agte	Sun, 08 May 2005 13:30
	Re: 260z Conversion	BlackSupra	Sat, 07 May 2005 08:22
	Re: 260z Conversion	aussie260z	Sat, 07 May 2005 09:00
	Re: 260z Conversion	thechuckster	Sat, 07 May 2005 09:53
	Re: 260z Conversion	BlackSupra	Sat, 07 May 2005 09:57
	Re: 260z Conversion	scrote	Sat, 07 May 2005 15:38
	Re: 260z Conversion	aussie260z	Sun, 08 May 2005 00:18
	Re: 260z Conversion	BlackSupra	Sun, 08 May 2005 00:30
	Re: 260z Conversion	aussie260z	Sun, 08 May 2005 01:16
	Re: 260z Conversion	BlackSupra	Sun, 08 May 2005 01:17
	Re: 260z Conversion	aussie260z	Sun, 08 May 2005 01:21
	Re: 260z Conversion	aussie260z	Sun, 08 May 2005 01:25
	Re: 260z Conversion	BlackSupra	Sun, 08 May 2005 02:09
	Re: 260z Conversion	mrshin	Sun, 08 May 2005 02:30
	Re: 260z Conversion	BlackSupra	Sun, 08 May 2005 02:32
	Re: 260z Conversion	aussie260z	Sun, 08 May 2005 02:54
	Re: 260z Conversion	aussie260z	Sun, 08 May 2005 02:59
	Re: 260z Conversion	gianttomato	Sun, 08 May 2005 07:13
	Re: 260z Conversion	mrshin	Sun, 08 May 2005 12:10
	Re: 260z Conversion	ed_ma61	Sun, 08 May 2005 16:08
	Re: 260z Conversion	4agte	Tue, 10 May 2005 02:46
	Re: 260z Conversion	quest	Sun, 08 May 2005 19:02
	Re: 260z Conversion	aussie260z	Mon, 09 May 2005 02:44
	Re: 260z Conversion	aussie260z	Mon, 09 May 2005 03:03
	Re: 260z Conversion	quest	Mon, 09 May 2005 06:04
	Re: 260z Conversion	IRA11Y	Mon, 09 May 2005 09:32
	Re: 260z Conversion	aussie260z	Tue, 10 May 2005 02:44
	Re: 260z Conversion	mrshin	Tue, 10 May 2005 14:32
	Re: 260z Conversion	aussie260z	Tue, 10 May 2005 23:28
	Re: 260z Conversion	gianttomato	Tue, 10 May 2005 23:53
	Re: 260z Conversion	Hodgie	Wed, 11 May 2005 04:03
	Re: 260z Conversion	mrshin	Wed, 11 May 2005 14:33
	Re: 260z Conversion	aussie260z	Thu, 12 May 2005 03:48
	Re: 260z Conversion	Allan	Thu, 12 May 2005 03:54
	Re: 260z Conversion	mrshin	Thu, 12 May 2005 14:11
	Re: 260z Conversion	Allan	Thu, 12 May 2005 16:14
	Re: 260z Conversion	mrshin	Sat, 14 May 2005 12:03
	Re: 260z Conversion	aussie260z	Sat, 14 May 2005 09:44
	Re: 260z Conversion	Norbie	Sat, 14 May 2005 11:27
	Re: 260z Conversion	mrshin	Sat, 14 May 2005 12:01
	Re: 260z Conversion	splatt	Tue, 05 July 2005 06:51
	Re: 260z Conversion	aussie260z	Tue, 05 July 2005 07:34

Previous Topic:	Greddy full auto timer
Next Topic:	ae86 aircon

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.