Toymods Car Club Inc: Parts Wanted => electronic dizzy to suit 18rg

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Classifieds » Parts Wanted » electronic dizzy to suit 18rg Show: Today's Posts :: Show Polls Email to friend

Author

Topic

ra_28
Regular

Location:
Brisbane
Registered:
April 2004

Re: electronic dizzy to suit 18rg

Sun, 08 May 2005 07:44

ra_28 wrote on Mon, 02 May 2005 14:51

There is little difference in size between the 18r and 18rg dizzy the only difference is that some of the older ones were Nippon denso and the later ones were bosh so there not compatible in the first place also. You need a bosh dizzy there more common than a Nippon. There is only one difference in the bosh, the really early dizzy have only a small hole in the side where the trigger is connected wire come out and the later ones they have a removable plastic piece with a bolt through it. You need the one with the removable plastic piece because the rubber boot on the electronic dizzy sits in there.

See how i asked if its not Nippon denson that what it looks like or does it say bosh on it? plus thats the old style see how it doesn't have the removable plastic piece

[Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Fri Jan 10 23:45:39 UTC 2025

Total time taken to generate the page: 0.0057239532470703 seconds

.:: Contact :: Home ::.