F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » need measurements for 7M ARP main studs Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
bbaacchhyy Forums Junkie Location: Adelaide Registered: September 2003	Re: need measurements for 7M ARP main studs Sun, 08 May 2005 22:07 Mr DOHC wrote on Fri, 06 May 2005 20:21 i have found the thread which showed a pic, but the pic is no longer hosted at turbosupras.com. bbaacchhyy wrote on Thu, 22 April 2004 17:15 he 7M-GTE ones taht I have are 26mm (as per the above pic), and 30mm for the threaded ends, with an overall length of 120mm. Diameter is 12mm as well Cheers Michael B would nayone have a pic of their set Imagine it a long steel shaft (120mm long) with a short thread at either end (one being 26 and the other end 30mm). One end has a small allen key orifice to screw the stud in with as well. I'm talking about Head studs. Sorry for the confusion Cheers Michael B [Updated on: Sun, 08 May 2005 22:10] [Report message to a moderator]

	Subject	Poster	Date
	need measurements for 7M ARP main studs	Mr DOHC	Wed, 04 May 2005 11:43
	Re: need measurements for 7M ARP main studs	bbaacchhyy	Wed, 04 May 2005 21:28
	Re: need measurements for 7M ARP main studs	Mr DOHC	Fri, 06 May 2005 10:51
	Re: need measurements for 7M ARP main studs	bbaacchhyy	Sun, 08 May 2005 22:07

Previous Topic:	Sprinter will not go into reverse....
Next Topic:	Wheel sizes?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.