F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » fly cutting 3tc forged pistons to suit 3tgte head Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
YelloRolla Forums Junkie Location: On your mum! Registered: May 2002	Re: fly cutting 3tc to suit 3tgte head Mon, 09 May 2005 06:23 just check the piston to valve clearance by using some plasticine. Place a nice disc of plasticine on the piston top (about 3-4mm thick) dummy assemble the engine and trun it over. take the head off and check where the vavle has touched. Cut throught the plasticine in the thinnest area (using a plastic knife) and measure how much clearance that you have (3.0mm is a good safe clearance). Having said all of that - finding blocks that will go out to 89mm is not all that easy. [Report message to a moderator]

	Subject	Poster	Date
	fly cutting 3tc forged pistons to suit 3tgte head	ta22celica_boy	Sun, 08 May 2005 09:51
	Re: fly cutting 3tc to suit 3tgte head	goonman86	Sun, 08 May 2005 12:14
	Re: fly cutting 3tc to suit 3tgte head	ta22celica_boy	Sun, 08 May 2005 18:09
	Re: fly cutting 3tc to suit 3tgte head	pheonix83	Sun, 08 May 2005 23:01
	Re: fly cutting 3tc to suit 3tgte head	YelloRolla	Mon, 09 May 2005 03:01
	Re: fly cutting 3tc to suit 3tgte head	ta22celica_boy	Mon, 09 May 2005 05:56
	Re: fly cutting 3tc to suit 3tgte head	YelloRolla	Mon, 09 May 2005 06:23
	Re: fly cutting 3tc to suit 3tgte head	TerryOBeirne	Mon, 09 May 2005 12:13
	Re: fly cutting 3tc forged pistons to suit 3tgte head	ta22celica_boy	Mon, 09 May 2005 07:28
	Re: fly cutting 3tc forged pistons to suit 3tgte head	YelloRolla	Mon, 09 May 2005 12:22

Previous Topic:	4AGE extractors O2 sensor wont fit???
Next Topic:	Aftermarket Cams for 3sge!!! After mild setup

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.