| Author | Topic |
|---|
Location:
Canberra
Registered:
April 2003
|
|
Re: 4agze starts then stalls
|
Mon, 09 May 2005 12:57
 
|
 |
ok it is the correct crank angle sensor for the ecu, the igniter not to sure of, I think it is one of a map sensored gze.
and yeah the loom was fucked and I had to fix it, to do this though I went a little differant, I really didn't want to hack my AW11 loom, so I re pinned everything at the ecu that was existing, and made a new loom out of the remains to run everything else that wasn't there, and tapped that into the AW11 loom where it needed to be.
well the igniter and coils has power to them deffinatly, don't know how to test if they are powered up.
Thanks
|
|
|
| | Subject | Poster | Date |
|---|
 |
4agze starts then stalls
|
wiso | Sun, 08 May 2005 09:26 |
|
Re: 4agze starts then stalls
|
berad | Sun, 08 May 2005 10:31 |
|
Re: 4agze starts then stalls
|
berad | Sun, 08 May 2005 10:32 |
|
Re: 4agze starts then stalls
|
wiso | Sun, 08 May 2005 11:09 |
|
Re: 4agze starts then stalls
|
berad | Mon, 09 May 2005 04:59 |
|
Re: 4agze starts then stalls
|
c2888 | Mon, 09 May 2005 06:29 |
|
Re: 4agze starts then stalls
|
wiso | Mon, 09 May 2005 07:10 |
|
Re: 4agze starts then stalls
|
sideshow | Mon, 09 May 2005 08:03 |
|
Re: 4agze starts then stalls
|
sideshow | Mon, 09 May 2005 07:09 |
|
Re: 4agze starts then stalls
|
YelloRolla | Mon, 09 May 2005 07:47 |
|
Re: 4agze starts then stalls
|
wiso | Mon, 09 May 2005 08:43 |
|
Re: 4agze starts then stalls
|
sideshow | Mon, 09 May 2005 08:50 |
|
Re: 4agze starts then stalls
|
wiso | Mon, 09 May 2005 12:57 |
|
Re: 4agze starts then stalls
|
wiso | Sat, 14 May 2005 07:35 |
|
Re: 4agze starts then stalls
|
berad | Mon, 09 May 2005 09:21 |
|
Re: 4agze starts then stalls
|
themx13 | Sat, 14 May 2005 13:10 |
|
Re: 4agze starts then stalls
|
sideshow | Sun, 15 May 2005 00:43 |
|
Re: 4agze starts then stalls
|
SilverGhost | Mon, 16 May 2005 09:16 |
