F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Tube& Fin Vs. Bar & Plate Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
SUPRAGTE Forums Junkie Location: North Sydney Registered: May 2002	Re: Tube& Fin Vs. Bar & Plate Sun, 22 December 2002 08:43 Tube and fin have a fair bit better flow. Bar and plate have a better cooling co-efficient, by about 30% for the same size tube and fin. So you gotta have a 4.5inch thick bar and plate to get it to flow as well as a 75mm tube and fin. I'm getting a tube and fin made up at the moment and just went through all the pro's and cons of both but that is the short and curly's of it. [Report message to a moderator]

	Subject	Poster	Date
	Tube& Fin Vs. Bar & Plate	trueno_gze	Sun, 22 December 2002 03:54
	Re: Tube& Fin Vs. Bar & Plate	Chriph	Sun, 22 December 2002 05:57
	Re: Tube& Fin Vs. Bar & Plate	SUPRAGTE	Sun, 22 December 2002 08:43

Previous Topic:	MX83 Cressida Cruise Control
Next Topic:	ST162 gearbox hassles

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.