F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Getting nut off crank pulley. Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ed_ma61 Forums Junkie Location: Lost in the K hole Registered: May 2002	Re: Getting nut off crank pulley. Sun, 22 December 2002 11:59 i hate this job... once i had to take the sump off, and jam a piece of aluminium between a crankshaft counterweight and the block body to stop the sucker turning, then used a 2m long breaker bar plus pipe on the nut. (not good if you plan on reusing the crank ) another time, i wedged a BIG screwdriver between the flywheel and the block, used above said breaker bar, and broke the screwdriver another goer was putting 2 bolts into the holes on the rear of the crank where the flywheel mounts, then wedge a 2m long jimmy bar between the bolts, then use 2m breaker bar again (broke 3 grade 10 HT bolts) last idea has worked a few times for me... would like to know how good a rattle gun is though... cheers ed [Report message to a moderator]

	Subject	Poster	Date
	Getting nut off crank pulley.	rollaboy	Sun, 22 December 2002 06:03
	Re: Getting nut off crank pulley.	Mr DOHC	Sun, 22 December 2002 07:17
	Re: Getting nut off crank pulley.	roadrunner	Tue, 24 December 2002 06:39
	Re: Getting nut off crank pulley.	rollaboy	Sun, 22 December 2002 07:21
	Re: Getting nut off crank pulley.	knackers	Sun, 22 December 2002 07:49
	Re: Getting nut off crank pulley.	SUPRAGTE	Sun, 22 December 2002 08:38
	Re: Getting nut off crank pulley.	Rolla Boy	Sun, 22 December 2002 10:07
	Re: Getting nut off crank pulley.	Grant	Sun, 22 December 2002 11:04
	Re: Getting nut off crank pulley.	feral4mr2	Sun, 22 December 2002 11:37
	Re: Getting nut off crank pulley.	inferno	Sun, 22 December 2002 11:58
	Re: Getting nut off crank pulley.	ed_ma61	Sun, 22 December 2002 11:59
	Re: Getting nut off crank pulley.	gianttomato	Sun, 22 December 2002 13:25
	Re: Getting nut off crank pulley.	rollaboy	Sun, 22 December 2002 13:47
	Re: Getting nut off crank pulley.	RWDboy	Sun, 22 December 2002 15:07
	Re: Getting nut off crank pulley.	Grega	Sun, 22 December 2002 20:03
	Re: Getting nut off crank pulley.	CLG	Sun, 22 December 2002 23:08
	Re: Getting nut off crank pulley.	CLG	Sun, 22 December 2002 23:13
	Re: Getting nut off crank pulley.	BigWorm	Mon, 23 December 2002 00:21
	Re: Getting nut off crank pulley.	rollaboy	Mon, 23 December 2002 11:47
	Re: Getting nut off crank pulley.	Bugman	Mon, 23 December 2002 11:58
	Re: Getting nut off crank pulley.	rollaboy	Mon, 23 December 2002 12:55
	Re: Getting nut off crank pulley.	Cool1	Mon, 23 December 2002 12:59
	Re: Getting nut off crank pulley.	rollaboy	Mon, 23 December 2002 13:08
	Re: Getting nut off crank pulley.	Cool1	Mon, 23 December 2002 13:21
	Re: Getting nut off crank pulley.	Grega	Mon, 23 December 2002 19:35
	Re: Getting nut off crank pulley.	feral4mr2	Mon, 23 December 2002 21:04
	Re: Getting nut off crank pulley.	Cool1	Tue, 24 December 2002 00:45
	Re: Getting nut off crank pulley.	raSkaS	Tue, 24 December 2002 03:54
	Re: Getting nut off crank pulley.	Bugman	Tue, 24 December 2002 06:42
	Re: Getting nut off crank pulley.	rollaboy	Tue, 24 December 2002 11:10
	Re: Getting nut off crank pulley.	Cool1	Tue, 24 December 2002 11:27
	Re: Getting nut off crank pulley.	RWDboy	Tue, 24 December 2002 11:40
	Re: Getting nut off crank pulley.	rollaboy	Wed, 25 December 2002 12:26
	Re: Getting nut off crank pulley.	Grega	Thu, 26 December 2002 21:02

Previous Topic:	Sprinter A/C wiring
Next Topic:	Clutch place in Canberra

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.