| Author | Topic |
|---|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: Rod, you around?
|
Thu, 06 June 2002 03:26
|
 |
Dorikin,
Mate the cams were actually done by Kellford Cams in QLD and they were noy exactly in good shape. The case hardening was breaking down and a couple of the lobes were really bad !
The cam specs were actually a poor choice in my opinion. Lift was actually 0.4mm less than stock JDM "86kw" cams Duration wa sincreased but they were not something I would have chosen I have alot of stuff here somewhere on Profiles for the 4AGE as I researched it for some months before going back to the T series.
I actually parted out the engine when it came out. Most of it ended up not far away so I could make room in the Shed. 
If your chasing cams then I would perhaps shy away from Kelford.
If you need help with your Cam choices there are are people on here that really do know there stuff and failing that Graham Wilkins who builds my engines is Quite familiar with the 4AGE.
Hope that helps,
|
|
|
