| Author | Topic |
|---|
Location:
sunny coast, qld
Registered:
October 2002
|
|
Re: datalogging with wbo2
|
Thu, 12 May 2005 03:50
 
|
 |
To make it display is easy, just power and earth and the wb connected.
What I wanted to do was connect it to my laptop via the computer cable and use the software to datalog the a/f ratio. It can do it against time normally but I wanted to do it against rpm. It says for a single coil thing to use the “coil” one or for a low voltage trigger use the “lo” one. So I am just wondering if it is as simple as splicing the wire from the igniter going to the ecu and sending that signal to the “lo” slot.
|
|
|
