| Author | Topic |
|---|
Location:
Melbourne, Australia
Registered:
March 2005
|
|
Re: ADEL: AE86 strut bottoms
|
Thu, 12 May 2005 15:48
 
|
 |
KE70 and AE71 steering arms are interchangeable between themselves.
RT132/XT130, early model Celica/Supra, etc. arms are different strut bolt pattern to KE70/AE71, but the same amongst themselves I think.
AE86 is also different to KE70 and AE71... logically I would think it to be the same as Corona/Celica/Supra etc. as above.
All these cars share the same ball joint (Powermax p/n PBJ45) so steering arms can be changed to suit your selected strut. Be aware of:
> Bump steer arising from the resulting alignment of tie rods and lower control arms, and
> Steering ratio, a function of steering arm length, and
> Ackerman angle, a function of tie rod joint positioning relative to strut bolt alignment (good image on Toymods somewhere to illustrate, search it I'm too tired  )
|
|
|
| | Subject | Poster | Date |
|---|
 |
ADEL: AE86 strut bottoms
|
slapper | Thu, 12 May 2005 06:56 |
|
Re: ADEL: AE86 strut bottoms
|
Steve-AE86 | Thu, 12 May 2005 10:50 |
|
Re: ADEL: AE86 strut bottoms
|
Big T | Thu, 12 May 2005 12:35 |
|
Re: ADEL: AE86 strut bottoms
|
slapper | Thu, 12 May 2005 13:17 |
|
Re: ADEL: AE86 strut bottoms
|
Steve-AE86 | Thu, 12 May 2005 10:51 |
|
Re: ADEL: AE86 strut bottoms
|
4ageeza | Thu, 12 May 2005 14:13 |
|
Re: ADEL: AE86 strut bottoms
|
September_Squall | Thu, 12 May 2005 15:48 |
|
Re: ADEL: AE86 strut bottoms
|
slapper | Thu, 12 May 2005 23:27 |
|
Re: ADEL: AE86 strut bottoms
|
Steve-AE86 | Sat, 14 May 2005 00:40 |
|
Re: ADEL: AE86 strut bottoms
|
slapper | Sun, 15 May 2005 14:06 |
