F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » What strength loctite on crank pulley bolt Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Secoh Occasional Poster Location: Newcastle Registered: June 2004	Re: What strength loctite on crank pulley bolt Thu, 12 May 2005 18:34 Use Loctite 232 (or whatever the current generation is called) which is the pale blue stuff. It's called "Nut Lock". nut lock is strong enough to prevent vibrations or thermal expansion changes from shaking it loose, but still allow you to undo it again at a later date. If you use stud lock (red stuff) or bearing lock (green stuff) that fucker will never ever be removed again, avoid them except for their intended uses. FWIW if you come across something some moron has used the wrong loctite on, heating it with a heat gun (or blowtorch) will free it right up in no time. loctite is good shit but you have to use it right. [Report message to a moderator]

	Subject	Poster	Date
	What strength loctite on crank pulley bolt	HighRolla	Thu, 12 May 2005 13:07
	Re: What strength loctite on crank pulley bolt	V8_MA61	Thu, 12 May 2005 13:08
	Re: What strength loctite on crank pulley bolt	HighRolla	Thu, 12 May 2005 13:13
	Re: What strength loctite on crank pulley bolt	ed_ma61	Thu, 12 May 2005 17:45
	Re: What strength loctite on crank pulley bolt	gearb0x	Thu, 12 May 2005 14:07
	Re: What strength loctite on crank pulley bolt	EldarO	Thu, 12 May 2005 14:08
	Re: What strength loctite on crank pulley bolt	Secoh	Thu, 12 May 2005 18:34
	Re: What strength loctite on crank pulley bolt	kingmick	Thu, 12 May 2005 21:17
	Re: What strength loctite on crank pulley bolt	HighRolla	Thu, 12 May 2005 21:29
	Re: What strength loctite on crank pulley bolt	Secoh	Fri, 13 May 2005 05:45
	Re: What strength loctite on crank pulley bolt	berad	Fri, 13 May 2005 06:11
	Re: What strength loctite on crank pulley bolt	Starfire	Sun, 15 May 2005 02:02
	Re: What strength loctite on crank pulley bolt	shinybluesteel	Sun, 15 May 2005 02:08
	Re: What strength loctite on crank pulley bolt	draven	Sun, 15 May 2005 02:25

Previous Topic:	maybe ecu burnt out
Next Topic:	KE20 hubcaps fit on mazda 13" rims?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.