| Author | Topic |
|---|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: Ignition Problems :(
|
Fri, 13 May 2005 00:11
 
|
 |
Your ignition switch is just probably on its way out. Whats happening there is too much resistance between the wiper contacts which isn't allowing enough current flow to fully engage the solenoid.
You can easily test this by putting a volt meter on the start solenoid and measuring the voltage when the key is being turned onto "start".
If the voltage drops too much your best bet would be to replace the ignition switch. This isn't as hard as it sounds as its only the switch section and not the complete ignition barrel like some people think 
|
|
|
