F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » What lbs to Torque 7MGTE Head to? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ed_ma61 Forums Junkie Location: Lost in the K hole Registered: May 2002	Re: What lbs to Torque 7MGTE Head to? Wed, 25 December 2002 14:28 dont forget, when putting studs in, put them in with loctite stud stuff, and install by hand only. then put the head on and tourque it down, leave it torqued till the loctie sets, and then relax the torque right off. leave it for 24 hours or something. then, when retorquing the final time, go in stages (at least three) approaching the final torque figure. leave tourqued at spec level (72ft/lbs) for 15 min, then back off 1/8 - 1/4 turn, and then torque again to 72ft/lbs. remember, threads should be lubed, and all torque readings should be taken with the nut turnin smoothly. cheers ed [Report message to a moderator]

	Subject	Poster	Date
	What lbs to Torque 7MGTE Head to?	MR MA70	Wed, 25 December 2002 00:27
	Re: What lbs to Torque 7MGTE Head to?	SUPRAGTE	Wed, 25 December 2002 00:54
	Re: What lbs to Torque 7MGTE Head to?	fstrnldr	Wed, 25 December 2002 08:02
	Re: What lbs to Torque 7MGTE Head to?	SUPRAGTE	Wed, 25 December 2002 11:46
	Re: What lbs to Torque 7MGTE Head to?	fstrnldr	Wed, 25 December 2002 17:52
	Re: What lbs to Torque 7MGTE Head to?	ed_ma61	Wed, 25 December 2002 14:28
	Re: What lbs to Torque 7MGTE Head to?	SUPRAGTE	Thu, 26 December 2002 05:16
	Re: What lbs to Torque 7MGTE Head to?	MR MA70	Thu, 26 December 2002 06:58
	Re: What lbs to Torque 7MGTE Head to?	SUPRAGTE	Thu, 26 December 2002 15:18
	Re: What lbs to Torque 7MGTE Head to?	Heyah	Fri, 27 December 2002 09:43
	Re: What lbs to Torque 7MGTE Head to?	ed_ma61	Fri, 27 December 2002 13:42
	Re: What lbs to Torque 7MGTE Head to?	ed_ma61	Fri, 27 December 2002 13:45
	Re: What lbs to Torque 7MGTE Head to?	fstrnldr	Fri, 27 December 2002 17:41
	Re: What lbs to Torque 7MGTE Head to?	Heyah	Fri, 27 December 2002 21:55
	Re: What lbs to Torque 7MGTE Head to?	rvrolla	Fri, 27 December 2002 23:57
	Re: What lbs to Torque 7MGTE Head to?	SUPRAGTE	Sat, 28 December 2002 04:11

Previous Topic:	undoing a uni joint on a tail shaft??
Next Topic:	Dizzy mod

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.