Toymods Car Club Inc: Wheels, Tyres, Suspension and Brakes => FS: AE86 TRD Street Coil Springs

Toymods Car Club
www.toymods.org.au

Classifieds » Wheels, Tyres, Suspension and Brakes » FS: AE86 TRD Street Coil Springs Show: Today's Posts :: Show Polls Email to friend

Author

Topic

Phrostbyte
Forums Junkie

I supported Toymods

Location:
Frankston, Victoria
Registered:
April 2004

Re: FS: AE86 TRD Street Coil Springs	Wed, 18 May 2005 12:56

Yes rears are identical, fronts aren't by a long shot, but a bit of dodgy work with some nice thick fence wire can fix that Kev. Edit: Just realized that the TRDs look a bit different to AE86 stock front springs. Looks as though if you chop them the right amount at the small end then they should fit right in, and that chopping distance should be perfect with height too . (KE70/AE71 front springs are identical in proportions to rear springs). For these springs to be a safe chop you will either have to get short stroke shocks or use a modified version of Sam_Q's wire trick, seen with my current TRD springs in this pic, I have since upgraded to RA28 struts that would fit the small end perfect, but yeah.. Basically you tie a wire around 2 points at each side, the cheapest short stroke setup known to man . [Updated on: Wed, 18 May 2005 13:11] [Report message to a moderator]

Current Time: Wed Apr 23 12:34:28 UTC 2025

Total time taken to generate the page: 0.0042939186096191 seconds

.:: Contact :: Home ::.