F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » (18rg) wade 137 cam specs Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Jonny2TG Forums Junkie Location: Tasmania Registered: May 2002	Re: (18rg) wade 137 cam specs Sun, 22 May 2005 03:06 I can't see why you would need to flycut the pistons or take the head off. But things will touch if you have them timed wrong. You really need a degree wheel (can print on paper if you have to), and a dial gauge to set them up. I have the dial gauge, but have only used a printed degree wheel I have made. [Report message to a moderator]

	Subject	Poster	Date
	(18rg) wade 137 cam specs	RA40Celica	Sun, 22 May 2005 01:15
	Re: (18rg) wade 137 cam specs	Jonny2TG	Sun, 22 May 2005 01:58
	Re: (18rg) wade 137 cam specs	Steve M	Sun, 22 May 2005 02:03
	Re: (18rg) wade 137 cam specs	Scootaphill	Sun, 22 May 2005 02:09
	Re: (18rg) wade 137 cam specs	RA40Celica	Sun, 22 May 2005 02:49
	Re: (18rg) wade 137 cam specs	Jonny2TG	Sun, 22 May 2005 03:06
	Re: (18rg) wade 137 cam specs	ra_28	Sun, 22 May 2005 03:11
	Re: (18rg) wade 137 cam specs	Mr DOHC	Sun, 22 May 2005 10:18
	Re: (18rg) wade 137 cam specs	RA40Celica	Sun, 22 May 2005 11:18

Previous Topic:	1UZFE into cressida
Next Topic:	HKS Metal Head Gasket (4AGE) / Head bolt torque

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.