F.A.Q.    Register    Login    Home Members    Search

Classifieds » Engines, Accessories and other Mechanicals » 18rg engine gear, efi setup, spare efi thermo housings and more Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
people100 Forums Junkie Location: Rocklea qld Registered: February 2003	Re: 18rg engine gear, efi setup, spare efi thermo housings and more Tue, 24 May 2005 09:26 ok here goes. my number is 0419364977 and u can call after 5:30pm weekdays. included is a 18rg bottum end. block has been acid dipped.has new rings and bearings. engine did about 500m of driving( once up my street). it was stripped as it was found there is a chance some rings may be upside down. rings can be removed and put on right way and should be sweet. 1 18rg block and timing case that has been machined, and oringed to suit turboing. 1 2mm copper head gasket to suit. 1 standard spare head gasket. most of a bottum end gasket kit and some of the top end. extracters ( could be used for turbo manifold) 2 x turbos that were suppose to suit a 2 litre. one seams alright other is a touch tight when spinning shaft. full 18rgeu efi setup including plenium, manifold, throttle body, fuel rail and 2 sets of injecters. 22re ecu and loom that will run it and also 22re throttle body which fits 18rg plenium also afm and sensers. solexs carbies ( unknown condition) no manifold. 18rg head that has new valve stem seals, has had ports welded up and re-die grinded out and machined flat. everything else needed to build the engine including cams etc etc. spare cams. look to have had some work done to them but wouldnt know as i just aquired them. but look the same as another set i have that has a few extra mm lift and longer duration.. spare head. spare complete bottum end that is siezed. spare solexs that are good for parts. may have a elec dizzy around i could throw in. prolly more around once i get into packing it all up. but plenty enough to build a nice new clean engine. [Report message to a moderator]

	Subject	Poster	Date
	18rg engine gear, efi setup, spare efi thermo housings and more	people100	Sun, 22 May 2005 07:51
	Re: 18rg engine gear, efi setup, spare efi thermo housings and more	simulant	Mon, 23 May 2005 03:15
	Re: 18rg engine gear, efi setup, spare efi thermo housings and more	people100	Mon, 23 May 2005 08:15
	Re: 18rg engine gear, efi setup, spare efi thermo housings and more	lightning	Mon, 23 May 2005 15:21
	Re: 18rg engine gear, efi setup, spare efi thermo housings and more	simulant	Tue, 24 May 2005 04:43
	Re: 18rg engine gear, efi setup, spare efi thermo housings and more	people100	Tue, 24 May 2005 09:26
	Re: 18rg engine gear, efi setup, spare efi thermo housings and more	people100	Sun, 29 May 2005 07:57
	Re: 18rg engine gear, efi setup, spare efi thermo housings and more	ra40coupe	Mon, 30 May 2005 11:14
	Re: 18rg engine gear, efi setup, spare efi thermo housings and more	barned01	Mon, 30 May 2005 12:45
	Re: 18rg engine gear, efi setup, spare efi thermo housings and more	MAD79R	Wed, 01 June 2005 06:53
	Re: 18rg engine gear, efi setup, spare efi thermo housings and more	lightning	Wed, 01 June 2005 07:57
	Re: 18rg engine gear, efi setup, spare efi thermo housings and more	people100	Wed, 01 June 2005 11:46
	Re: 18rg engine gear, efi setup, spare efi thermo housings and more	TurboRA40	Sat, 06 August 2005 12:38

Previous Topic:	100kw ae92 / ae101 Parts Sale *PICS UP* (100kw gearbox, inlet manif , HD clutch , oil cooler , etc)
Next Topic:	TA22 tail shaft and Diff.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.