F.A.Q.    Register    Login    Home Members    Search

Toymods » General Car Talk » 'plumb back' BOV for 2nd Gen 3SGTE Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
SilverGhost Forums Junkie Location: Sydney Registered: September 2004	'plumb back' BOV for 2nd Gen 3SGTE Tue, 24 May 2005 09:50 Hi All, Im wondering if anyone has researched installing one of these units and the steps involved. I have a 2nd Gen 3SGTE with standard intake piping and an ATMO BOV in the standard spot (first bend leading to the top mount IC just after the turbo) What I want to know is: 1. how much would I be looking at to get one fabricated, or can I fit one from a 3rd Gen 3SGTE or other engine with some mods? 2. would it use the same 'hole' that the atmo BOV is currently using to vent the boost back into the intake? 3. does anyone have a similar setup and could provide me with some pics?? cheers!! [Report message to a moderator]

	Subject	Poster	Date
	'plumb back' BOV for 2nd Gen 3SGTE	SilverGhost	Tue, 24 May 2005 09:50
	Re: 'plumb back' BOV for 2nd Gen 3SGTE	Classique71	Tue, 24 May 2005 12:54

Previous Topic:	Better, Or WORSE???
Next Topic:	Toyota is the new nissan

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.