Location: tallahassee FL usOFa
Registered: May 2002
Re: Resizing conrods
Wed, 25 May 2005 20:05
yes. they'll cut/grind/machine some off the rod or cap or both, and hone it to size. its center to center will be a little shorter and its deck height will be a little more.
************************************
sorry for the confusion. in my book, if i could write -
piston deck height is the distance between the piston head/deck(not its pop-up or dish) & block's head surface.
block deck height is the distance between the crank centerline(mains) & block's head surface.
Wed, 25 May 2005 20:05
