| Author | Topic |
|---|
Location:
Brisbane
Registered:
April 2004
|
|
Re: Easy tailshatf upgrade for RA2x
|
Mon, 30 May 2005 10:03
 
|
 |
| ChuckLandwehr wrote on Mon, 30 May 2005 17:11 |
ra_28, some rear flange joints will bolt up, others will not, check your measurements. I personally have fitted 3 Automatic single piece TA22 tailshafts to RA23/RA28's. Two were ok, the other had to have the rear flange swapped for the original from the 2 piece shaft. Go figure.
cheers Chuck.
|
Check my measurements WTF I never fitted ta22 tailshafts if you read the first post I'm talking about RT104 tailshafts and I've got 4 in my shed and there all the same.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Easy tailshatf upgrade for RA2x
|
ra_28 | Thu, 26 May 2005 01:40 |
|
Re: Easy tailshatf upgrade for RA2x
|
TurboRA28 | Thu, 26 May 2005 01:48 |
|
Re: Easy tailshatf upgrade for RA2x
|
ra23celica | Thu, 26 May 2005 01:50 |
|
Re: Easy tailshatf upgrade for RA2x
|
ddeane | Thu, 26 May 2005 01:56 |
|
Re: Easy tailshatf upgrade for RA2x
|
tanman | Thu, 26 May 2005 02:31 |
|
Re: Easy tailshatf upgrade for RA2x
|
tanman | Thu, 26 May 2005 02:32 |
|
Re: Easy tailshatf upgrade for RA2x
|
ddeane | Thu, 26 May 2005 05:30 |
|
Re: Easy tailshatf upgrade for RA2x
|
Gleno28 | Fri, 27 May 2005 07:18 |
|
Re: Easy tailshatf upgrade for RA2x
|
ra_28 | Fri, 27 May 2005 07:27 |
|
Re: Easy tailshatf upgrade for RA2x
|
Gleno28 | Sun, 29 May 2005 23:52 |
|
Re: Easy tailshatf upgrade for RA2x
|
ChuckLandwehr | Mon, 30 May 2005 07:41 |
|
Re: Easy tailshatf upgrade for RA2x
|
ra_28 | Mon, 30 May 2005 10:03 |
|
Re: Easy tailshatf upgrade for RA2x
|
brett_celicacoupe | Mon, 30 May 2005 10:16 |
